FORScan forum

Hello,
I have a 2012 Transit Connect WF0UXXTTPUCK78122 with the engine overheating,a few years ago was made dpf off(client says).
The blower start at 120*C low speed,130*C high speed,I think is very high the point of turning on(I used a heater to check this,in the normal race I can't see any speed ...

Hello,
After clearing the fault codes related to low battery was not stored again.
Solved,my problem was fusebox with no contact on f28.
Best regards

Hello,
I have in workshop a 2018 Ford Custom with nonworking AC(AC_DMND is off in PCM data list evenif is on or off on HVAC).The pressure is ok(aprox 600KPa),no faults in HVAC but a lot of strange faults in PCM related to transmission even the car is equipped with manual transmission.I think PCM was ...

Hello,
On a 2014 Ford B-max with crash stored I performed crash reset flag and after I found B007E-13 and B007F-13.
Can be altered the configuration whan crash flag reset is performed?I have ABT file,please check it.
Thank you

Hello,
Moved my post,sorry.

Hello,
Please guide me to write this data into ABS.
I can't write using manual input(gives me checksum error).
The .ab file must be placed in a dedicate folder?
Thank you.

Hello,
ON a 2007 Ford C-Max /1.6 TDCI/90 CP/WF0EXXGCDE7T21791 I found at the first search:C1155,C1306 and U2202.
After the erasing of fault memory only U2202 re-appears on ABS/TCM(3M51-2C405-HC).
PCM was replaced on this car(because of a bad battery,a rapid charger was used and PCM was damaged ...

Hello,
On Focus 2013 WF0KXXGCBKDC71377 I erased crash data flag from RCM using 2.3.3 version of software.
Now I have some new fault codes,I think RCM must be recoded.
Please guide me to recode SRS unit CM5T-14B321-CA.
Also in BCMii I have crash stored.
Thank you

Hello,
Some recoding will be necesary after "crash flag reset" on 2013 Focus?
Thank you