FORScan forum

Hi All

In need of some help......

I know its possible as I have seen it working but I need to find out how to activate it. Many a time I have pulled the electric break switch and the break hasn't come on first time. I need to find out how to turn on the "AUTO electric parking break on when ...

Hi All,
Can anyone provide a screenshot of TRM AS built data in Forscan with TRM correctly installed. I am getting a U2100 error after installing a towbar and Ford module/Wiring kit. I used the TRM install function in Forscan to set up. I have 2016 Mondeo 2.0tdci

No still no good, might do a bit more digging on this. It seems to be working ok just the DTC is a bit annoying. thanks for your help

Tried changing 009B to 019B in Forscan and deleting/resetting the DTC and module but still not working - any ideas?

i used the TRM module initialisation function in Forscan to setup. It looks to poll a few different modules for settings. Do i only look at the TRM module and what should i change? thought it might be something to do with missing modules in the initialisation function

Hi,
Just installed a towbar and factory trailer module today. I tried to use Forscan to install the module but am getting the same U2100 error as you. Did you ever figure out how to get this working so it doesn't throw up U2100?

forscan changes checksum automatically :!:
the correct checksum number is 01
1.png


Great that's good to know - looks like all went as ok so. Will see tomorrow if i notice any difference in performance :D

What do you think difference in performance ?


Seems to pull alot better 3rd-4th ...

fordsmax471 wrote: Wed Sep 16, 2020 12:16 pm forscan changes checksum automatically
the correct checksum number is 01
1.png

Great that's good to know - looks like all went as ok so. Will see tomorrow if i notice any difference in performance

Hi there,
I recently bought a MK5 Mondeo 2.0 tdci and was told by the seller that it had Sync 3 installed after initial purchase. Could this be what is throwing up error DTCs in the APIM module for lost communication and steering wheel pack? Is it ok to just go ahead and reset the module or do i ...

yes change
PCM -module configuration settings "engine"
ABS - as built data no...


Hi fordsmax471,
All done with the change, the only question i have is when modifying the ABS data i got an invalid checksum error. Is this normal? and the last digit also went for 0 to 1 automatically after ...