How to program Central Configuration using FORScan

[bartman]

Hello,
I have full licence and I get full functionality with my car except Central Configuration. All I get is a blank screen without any functions when I click on it. What is the problem?
My car is 2014 Ford S-Max 2.2 TDCI.
Thanks.

[fmiki]

I think not yet supported. As my tourneo custom.

[notmoby]

Happy to report success enabling powerfold mirrors and puddle lights on a mk 7.5 Fiesta. Extended licence and Engineering mode needed in Central Configuration. Good work chaps!

[padula]

i own a mk7,5 fiesta, brazilian build.
the central configuration tab won't appear when i go to programming.
did i miss something on the setup? i can see the modules, but only show values, not names

[padula]

i own a mk7,5 fiesta, brazilian build.
the central configuration tab won't appear when i go to programming.
did i miss something on the setup? i can see the modules, but only show values, not names

i was entering the wrong menu configurations appears on IPC

[jimrpa]

I have a US 2016 Focus Titanium with the Technology Package. I'm trying to enable Global Open/Close. I'm using an OBDLink MX WiFi, and FORScan (with extended license) running on Windows 10 (on VirtualBox on a MacBook Pro, hence, the OBDLink MX). The OBDLink MX WiFi is configured in infrastructure mode. FORScan sees and connects to the OBDLink MX. When I go to Configuration and Programming (the "chip" icon) and click on the "run service procedure" button (the "play" button), I do NOT get a screen that looks like the second screen shot in the first post of this thread (the one which lists a bunch of parameters and the values that can be set). Instead, I get a screen that looks like one in one of the later posts, which is rows of 4-digit numbers in blocks, and some of the blocks end with buttons that are labeled "WRITE". If I select "BdyCM" (not the "AS BUILT") module, but the other one) before running the service procedure, I will get a screen with about a dozen parameters on it, but there is no dropdown at the top where I can select "Engineering 1"/"Engineering 2". Selecting any of the other modules results in a screen with the rows of 4-digit numbers.

Any insight as to what's going on here?

Note that I've tried using Focccus, however Focccus only works over serial ports and, while I can redirect the OBDLink MX WiFi to a com port through VirtualBox (and I'm pretty sure the VirtualBox redirect is successful, but I'm not sure how to verify it), Focccus isn't "seeing" it.

Thanks!

[focus1.5tdci]

Hello,

I can´t see the central configuration on my car, focus 2016, I check in another car first and appear the central configuration

Any help?

Thanks in advance

[MarcoGaspar]

Hello,

I download the version 2.3.3 beta, 2016-07-26 i try to Central configuration and i get a error: error loading calibration sbl file.

Ford Mondeo MK4 1.8 TDI 2008

Best Regards,
Marco Gaspar

[lollapalooza]

I download the version 2.3.3 beta, 2016-07-26 i try to Central configuration and i get a error: error loading calibration sbl file.

Try and read the release notes...

[MarcoGaspar]

I download the version 2.3.3 beta, 2016-07-26 i try to Central configuration and i get a error: error loading calibration sbl file.

Try and read the release notes...

Done

After putting calibration files i get this error:

(OK) [13:19:03.562] Central configuration (Main) has been started
(WARN) [13:19:03.593] Read configuration from primary module...
(WARN) [13:19:06.375] Loading SBL to primary module...
(WARN) [13:19:06.671] Loading block 1/4...
(WARN) [13:19:28.984] Loading block 2/4...
(WARN) [13:19:29.406] Loading block 3/4...
(WARN) [13:19:29.781] Loading block 4/4...
(OK) [13:19:30.406] SBL loaded successfully
(OK) [13:19:30.656] Read block #1
(OK) [13:19:30.828] Read block #2
(WARN) [13:19:31.078] Operation failed, retrying...
(WARN) [13:19:31.375] Operation failed, retrying...
(WARN) [13:19:31.671] Operation failed, retrying...
(WARN) [13:19:31.968] Operation failed, retrying...
(WARN) [13:19:32.265] Operation failed, retrying...
(ERR) [13:19:32.406] Reading block 3 failed
(ERR) [13:19:32.437] Service procedure has been interrupted