Page 2 of 4
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Wed Nov 18, 2020 4:05 am
by esqueue
Send PM to FORScan and request v2.4.3
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Fri Nov 27, 2020 11:04 am
by Cristian_85
request v2.4.3 .
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Mon Dec 21, 2020 4:34 am
by bonez8393
Send PM to FORScan and request v2.4.3
Thank you
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Sun Jan 31, 2021 9:22 am
by takbam
Send PM to FORScan and request v2.4.3
Thank you
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Mon Feb 01, 2021 6:48 pm
by bozzayakos
request v2.4.3
Thank you
Re: FORScan v2.4.3 APIM Calibration Update
Posted: Thu Feb 04, 2021 12:42 pm
by Palawan-Taucher
Hello,
i'm new here and maybe also in the wrong topic, so if ... please correct me, if OFF topic.
I haved scaned my APIM for new version of calibrations and got 4 new files presented
- APIM_before - Kopie.JPG
After i tried a update only 1 file was actualized, only Strategy, but not Calibration level.
- APIM_after - Kopie.JPG
Do i think in the wrong way? Or do i something wrong? Can i do this with FORScan?
Please help.
Thanks, Jörg
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Thu Feb 04, 2021 6:10 pm
by dawid123
Send PM to FORScan and request v2.4.3
Thank you
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Thu Feb 04, 2021 7:15 pm
by Palawan-Taucher
I thought I already had it ...
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Fri Feb 05, 2021 1:24 pm
by Palawan-Taucher
I was able to update the Strategy ,
but I know , there is a newer on , 1U5T-14G374-EL is already there ...
Why it is not shown ?
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Sat Feb 06, 2021 7:24 pm
by lenko
I updated most of my modules with newer strategies and as they were being updated it showed the new strategies being programmed in, but on downloading the module information after this, only three showed the new update. The RTGM, the VDM and the SCCM. I'm just wondering why the others don't show being updated as they obviously were shown updating with successful completion . Is there anything else I should be doing?