FORScan forum

4. Remove keyfob from the car in case of keyless system (with engine start button). In case of standard blade key, you have to block the transponder (for example, wrap the keyfob with a foil).
5. Stop the engine (turn the ignition off)
6. Turn the igfnition On but don't run the engine.

chet6003 wrote: Tue Jun 02, 2020 6:39 am

FORScan wrote: Tue Dec 17, 2019 7:43 am It is typical situation when people have MyKey enabled and have no Admin key that would allow to clear MyKey feature. Previously, our support answered that there are 2 ways to do it with FORScan:

1. Reprogram PATS - erase all known keys and program 2 new ones. This removes MyKey completely, but it is quite "heavy" way: it requires 2 working different good quality keys and PATS programming functions (in FORScan it is available not for all models).

2. Disable MyKey options in IPC and other modules if available. This removes chimes and warnings, but not MyKey itself. Some limits, like speed limit, may remain active after this procedure.

But one of our users found a workaround about how to clear MyKeys with FORScan but without any programming. It can be done in FORScan for Windows or FORScan Lite for iOS, Android. Here is the exact sequence:

1. Start the car and connect to it with FORScan.
2 Start PCM KOER test (Tests->PCM Key On Engine Running On Demand Self Test)
3. Wait until the test is completed
4. Remove keyfob from the car in case of keyless system (with engine start button). In case of standard blade key, you have to block the transponder (for example, wrap the keyfob with a foil).
5. Stop the engine (turn the ignition off)
6. Turn the igfnition On but don't run the engine.
7. Go to MyKey menu in your instrument cluster and execute Clear MyKeys option .

You now have MyKey removed.

Note: this was tested on cars with gasoline engine, not tested on diesel engines. "

Please leave your feedback on this method.

Oh my goodness! Finally got it 2016 F-150 keyless entry keyless start. with the "PCM selftest koer and remove key from truck. I actually got it an hour ago or so HOWEVER I already went into the IPC module and disabled all of the mykey features..(this did help temporarily to remove volume and speed limiting!).. that said, every time I went back to the settings in the dash to erase all mykeys did not populate, only because I already disabled it in the IPC module I realized that one of the "restricted satelite stations" was now playing!!!! At that moment I realized that I had disabled the mykey, I then went back to the IPC module and enabled the mykey features and voala! the mykey option on the dash now populated and thus the erase all mykeys! Then it took me a few tries to realize I had to hold the OK button down to finally reset all mykeys

I hope this helps someone that has already disabled all of the mykey options in the IPC module

Thank you everyone that posted helpfull information!! Thank you FORScan for this software! saved me 250 for a Stealership keyless key and 140 for Stealership to program!!!