FORScan forum

Posted: **Tue Jun 02, 2020 9:32 pm**

I had posted my .CCT for my BSM on another forum

https://www.fordtransitusaforum.com/thr ... st-1049199

Here is one I saved from a 2018 Ford Transit. I can provide the ABT file or VIN as well if that's helpful.

Code: Select all

;Block 1
FE00318273713030350D0A3146545952325847364A4B4131393434310D0A0000000000000000000D0A0000000D0A0000000000000D0A00000D0A0000000000000D0A00000000000000000000000000000000000000000D0A
;Block 2
00000000000000000000000000000000000000000000000000000000000000000000000000000000
;Block 3
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
;Block 4
FC6F
;Block 5
650901002A01030149020901010100020001000101010101000101000204000201020202010001010002070101000100000057000001000103010101000900010100010E104645010401080100020130010001000101000102000000110000010101040005010001000100000302000A00000100000100000000020101000102000003000002000201020201020001040101040202000000000100000100010000000000000000000002000100000000010100010000000001010100000101010002000200010100000000000000000000010100000100010002030000010001010000000000050000000100000001010000010100000000000030440000

Posted: **Sun Jan 31, 2021 5:47 pm**

Can you help me with a link to a video tutorial where I can format .ab file extension to . abt extension? I have been trying to reprogram an apim I got from a ford edge to my 2011 ford explorer limited. The as built data I downloaded is in.ab extension and aren't loading on forscan. I'm stuck.

Posted: **Tue Feb 02, 2021 12:04 am**

Ere wrote: Sun Jan 31, 2021 5:47 pm Can you help me with a link to a video tutorial where I can format .ab file extension to . abt extension? I have been trying to reprogram an apim I got from a ford edge to my 2011 ford explorer limited. The as built data I downloaded is in.ab extension and aren't loading on forscan. I'm stuck.

I am not 100% but have you tried just changing the as built file name from .ab to .abt

I am sure I did that to load the apim details from a sync 2 car which I downloaded from the motorcraft site when I upgraded from sync 1 to sync 2.

Alternatively try this. You will be able to import the as built ab file and I am pretty sure you can save it as an abt file.
Download link

http://www.compulsivecode.com/Project_A ... mpare.aspx

Posted: **Thu Feb 10, 2022 10:47 pm**

Wondered if someone with a normally functioning 2010-12 Fusion/Lincoln hybrid vehicle that has normally functioning EV mode to send me a copy of their BECM ABT file. File should look something like this *VIN*_BECM_20210313_131817.abt", (ok if you mask or delete your VIN from file name). I assume all responsibility if it doesn't work out and I ruin my hv battery and/or vehicle. I just want to load it to get into rebalance mode, last ditch effort before spending a couple grand to replace with a rebuilt battery. Please send file to my email address, makiro086@gmail.com. Thanks, Mark

FORScan forum

*.ABT format in FORScan

Re: *.ABT format in FORScan

Re: *.ABT format in FORScan

Re: *.ABT format in FORScan

Re: *.ABT format in FORScan