Page 1 of 4
FORScan v2.4.2 APIM Calibration Update
Posted: Sat Sep 19, 2020 6:46 pm
by AHNA1711
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Thu Sep 24, 2020 5:03 am
by sanglt
I had surfaced the same. I had reported to FORScan team with debug information. Hopefully, FORScan can have fixed on the next version.
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Sat Sep 26, 2020 1:55 pm
by Halda
You need 2.4.3 problem has been fixed.
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Sat Sep 26, 2020 3:49 pm
by rgcarnevale
Where did you get ForScan 2.4.3.
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Sun Sep 27, 2020 10:39 pm
by sanglt
Halda wrote: Sat Sep 26, 2020 1:55 pm
You need 2.4.3 problem has been fixed.
Maybe team fix on later version. But on my 2.4.3 test version the issue still persist. I can only select file for SBL field only.
- image001.jpg (218.72 KiB) Viewed 9257 times
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Mon Sep 28, 2020 4:35 am
by Wicked RS
Halda wrote: Sat Sep 26, 2020 1:55 pm
You need 2.4.3 problem has been fixed.
Where can I get this from Halda?
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Wed Sep 30, 2020 5:30 am
by AHNA1711
Wicked RS wrote: Mon Sep 28, 2020 4:35 am
Halda wrote: Sat Sep 26, 2020 1:55 pm
You need 2.4.3 problem has been fixed.
Where can I get this from Halda?
Send a PM to FORScan and request v2.4.3.
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Wed Sep 30, 2020 5:30 am
by AHNA1711
Wicked RS wrote: Mon Sep 28, 2020 4:35 am
Halda wrote: Sat Sep 26, 2020 1:55 pm
You need 2.4.3 problem has been fixed.
Where can I get this from Halda?
Send PM to FORScan and request v2.4.3
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Tue Nov 03, 2020 3:47 pm
by sarunyoo1901
Send PM to FORScan and request v2.4.3
thank you
Re: FORScan v2.4.2 APIM Calibration Update
Posted: Tue Nov 10, 2020 9:58 pm
by gianni_66
Send PM to FORScan and request v2.4.3
