Page 1 of 1
IPMA bricked while updating
Posted: Tue Oct 26, 2021 3:46 am
by alfredfenglq
Hi guys
I have a 2017 lincoln mkz and I was trying to update the IPMA with 2.4.4. However the car powered off in the middle of the process and now I get DTC U3000:96 and lka is not working.
Is there any way to bring it back or I have to replace the module?
Thanks.
Re: IPMA bricked while updating
Posted: Tue Oct 26, 2021 1:17 pm
by fordsmax471
we can try to fix it on Thursday or Friday
send vin pm
Re: IPMA bricked while updating
Posted: Tue Oct 26, 2021 1:20 pm
by alfredfenglq
fordsmax471 wrote: Tue Oct 26, 2021 1:17 pm
we can try to fix it on Thursday or Friday
send vin pm
Thank you, vin has been sent
Re: IPMA bricked while updating
Posted: Sat Nov 27, 2021 2:06 pm
by Islamkh
Hi
I have the same issue, when i starts the firmware updates, and it is starts smoothly till reaches 89% (around 32 mins) and then the car shuts down.
plz help if you solve it
Re: IPMA bricked while updating
Posted: Sat Nov 27, 2021 2:30 pm
by alfredfenglq
Islamkh wrote: Sat Nov 27, 2021 2:06 pm
Hi
I have the same issue, when i starts the firmware updates, and it is starts smoothly till reaches 89% (around 32 mins) and then the car shuts down.
plz help if you solve it
I got a ford engineer to help me fix it.
He has replaced flash inside the module and reflash the 081file with ucds.
Re: IPMA bricked while updating
Posted: Sat Nov 27, 2021 5:57 pm
by Islamkh
I couldn't get ucds, they not deliver to my region, so i need to try fixing it through forscan,