FORScan forum

UGH im sure you all seen this before idiot thinks he backed everything up idiot did not AS built data etc is scraps ideas and suggestions team?

This is BEFORE i broke things

Interface:
Type: FTDI #1:223130128059, 2000000 bps
Adapter: OBDLink EX r2.2.1 STN2231 v5.8.1 (ELM327 v1.4b)
Min.delay: 3 ms ( Excellent)
Errors: None

Vehicle:
Model: Ford Ranger/Courier/Mazda B-Series
Engine: Duratorq Turbo Diesel Common Rail Injection
Capacity: 3.2L
Year: 2012
Generation: 2011 MY
Fuel: Diesel
Transmission gear: Manual
VIN: MNAUMEF50CW119270

PCM - Powertrain Control Module
Part number: AB39-12A650-KD
Calibration level: AB39-12A650-KD
Strategy : HB3G-14C204-KB
Calibration: AB39-12K532-AKV
Hardware type: AB3Q-12B684-XX
VIN: MNAUMEF50CW119270
Total Distance: 146055.0 km

OBDII - On Board Diagnostic II
VIN: MNAUMEF50CW119270

ABS - Antilock braking system
Part number: AB31-2C405-AE
Calibration level: AB31-2C405-AE
Strategy : AB31-14C036-AE
Calibration: AB31-14C037-AD
VIN: MNAUMEF50CW119270

RCM - Restraint Control Module
Part number: AB39-14B321-BE
Calibration level: AB39-14B321-BE (latest known: AB39-14B321-BH)
Strategy : AB39-14C028-AA
Calibration: AB39-14C098-BD
VIN: MNAUMEF50CW119270

BCMii - Body Control Module
Part number: AB39-14A073-BG
Calibration level: AB39-14A073-BG (latest known: DB39-14A073-BE)
Strategy : AB39-14C094-AF
Calibration: AB39-14C095-AE
VIN: MNAUMEF50CW119270
Total Distance: 146055.0 km

FCDIM - Front Control/Display Interface Module
Part number: AB39-18B955-BA
Calibration level: AB39-18B955-BA
Strategy : AM5T-14D358-BG
Calibration: AM5T-14D359-BG
VIN: MNAUMEF50CW119270
Total Distance: 146055.0 km

TRM - Trailer Module
Part number: AB39-14B192-AB
Calibration level: AB39-14B192-AB
Strategy : AB39-14C280-AB
Total Distance: 146055.0 km

SRM - Speech Recognition Module
Part number: 8M5T-19C112-AT
Calibration level: 8M5T-19C112-AT
Strategy : 8M5T-14D511-AT
Calibration: 8M5T-14D512-AA
VIN: MNAUMEF50CW119270
Total Distance: 146055.0 km

ACM - Audio Control Module
Part number: AB39-18C815-GE
Calibration level: AB39-18C815-GE (latest known: AB39-18C815-GF)
Strategy : AM5T-14C044-AK

IPC - Instrument Panel Control Module
Part number: AB39-10849-DG
Calibration level: AB39-10849-DG
Strategy : AB39-14C026-AG
Calibration: AB39-14C088-AC
Odometer: 146055.0 km
Total Distance: 146055.0 km

Try here:
https://www.motorcraftservice.com/AsBuilt

Type your VIN and get asbuilt data

Module Build Data (As-Built)
VIN MNAUMEF50CW119270
Tear Tag
Vehicle Data

Module Information Found
When prompted, be sure to save or copy the file to the following IDS directory:
c:\Program Files\Ford Motor Company\Calibration Files

PCM Modules
BCE Modules
Module Address Instructions

7E0-01-01 0100 0000 00EA
7E0-01-02 00EA
720-01-01 2049
720-02-01 002A
720-03-01 002B
720-04-01 002C
720-05-01 002D
720-06-01 002E
720-07-01 002F
720-08-01 3969
720-09-01 1F50
720-10-01 0038
720-11-01 013A
720-12-01 003A
720-13-01 013C
720-14-01 013D
720-15-01 4D4E 4155 4DBB
720-15-02 4546 3530 4371
720-15-03 5731 3139 3263
720-15-04 3730 A7
726-01-01 0028 003D 0EA2
726-01-02 1142 0001 0084
726-01-03 010A 0300 0948
726-01-04 003C 0107 0076
726-01-05 0000 003C 006F
726-01-06 0000 0000 0034
726-01-07 0000 0000 0035
726-01-08 0000 0000 0036
726-01-09 0000 0000 0037
726-01-10 0000 0000 003E
727-01-01 0131
737-01-01 4D4E 4155 4DBE
737-01-02 4546 3530 4374
737-01-03 5731 3139 3266
737-01-04 3730 AA
737-02-01 076E 0800 BE
737-03-01 0F51
737-04-01 0043
737-05-01 4211 97

Seems to be missing mostly ... Everything?

BeardedNRG wrote: Wed Feb 28, 2024 7:47 am Module Build Data (As-Built)
VIN MNAUMEF50CW119270
Tear Tag
Vehicle Data

Module Information Found
When prompted, be sure to save or copy the file to the following IDS directory:
c:\Program Files\Ford Motor Company\Calibration Files

PCM Modules
BCE Modules
Module Address Instructions

7E0-01-01 0100 0000 00EA
7E0-01-02 00EA
720-01-01 2049
720-02-01 002A
720-03-01 002B
720-04-01 002C
720-05-01 002D
720-06-01 002E
720-07-01 002F
720-08-01 3969
720-09-01 1F50
720-10-01 0038
720-11-01 013A
720-12-01 003A
720-13-01 013C
720-14-01 013D
720-15-01 4D4E 4155 4DBB
720-15-02 4546 3530 4371
720-15-03 5731 3139 3263
720-15-04 3730 A7
726-01-01 0028 003D 0EA2
726-01-02 1142 0001 0084
726-01-03 010A 0300 0948
726-01-04 003C 0107 0076
726-01-05 0000 003C 006F
726-01-06 0000 0000 0034
726-01-07 0000 0000 0035
726-01-08 0000 0000 0036
726-01-09 0000 0000 0037
726-01-10 0000 0000 003E
727-01-01 0131
737-01-01 4D4E 4155 4DBE
737-01-02 4546 3530 4374
737-01-03 5731 3139 3266
737-01-04 3730 AA
737-02-01 076E 0800 BE
737-03-01 0F51
737-04-01 0043
737-05-01 4211 97

Seems to be missing mostly ... Everything?

Not sure what you mean by "Missing mostly.... Everything" as all the modules this vehicle left the factory with are listed and identified by their hexidecimal AsBuilt address! Ford has been listing all modules under the "BCE" or Body Control Electronic Modules, including the PCM(Hex address 7E0) for some time! My suspicion, as a guess, is to save web space.
I downloaded the AsBuilt for a 2023 Explorer and printed the web page to a PDF file and paper copy and it totalled 37 full two sided pages of data!

What I see in your image post and in the down load for your VIN that I downloaded is quite typical of the small number of AsBuilt listed modules from 2008 to about 2013! There just is no longer any headings separating and naming the Modules(BCE) on a growing number of AsBuilt file results from the AsBuilt server at Ford!

Here is a list of the module addresses and the module names in your image!

:7E0 PCM Power Train Control Module

:720 IPC Instrument Panel Cluster Module(Contains VIN in Hex code at 720-15-01)

:726 BCM Body Control Module

:727 ACM Audio Control Module

:737 RCM Restraints Control Module (Contains VIN in hex at 737-01-01)

The PCM in these years was in most cases configured in PCM firmware(VIN ID Block requiring FORScan 2.4.10 and an FEPS capable adapter in many cases) Only a small part was configured in AsBuilt!

Can't say for sure as it appears this a Ranger in the Euro market with a 3.2 litre diesel and the Calibration list Here in North America Motorcraftservice .com does not list any calibration files for that engine! Maybe someone( or a Dealer) with an IDS/FJDS subscription could look those up?

Going back to the beginning, it would be helpful to understand what is broken, how it got broken, what you where working on when this happened and what help you are looking for here! Your original post only shows the connection log from before the problem and does not offer much(actually nothing) about the what you say you managed to break some how!

More information would be helpful?

ill get some data up maybe someone can help basically i did a firmware update and it didnt work out and i now cannot restore the previous firmware as i cannot find the bloody thing anywhere on any forum or website! :*(

WELL after what feels like a endless nightmare im still unable to obtain the correct files to restore my car so next week it will be off to ford on a tow truck to see how many thousands of dollars they want to fix it so i hopefully dont loose my job for not being able to get there every day anymore sucks but thats what u get when u dont backup enough things and fords website is a sack of potato's

Hi,

The main question is still: On which module you did the Firmware update and how?
How can someone help, if nobody knows which module you maybe bricked or what you tried.
Updating firmware allways should be with a reason and not just for fun or because there is an update available.

Also would be interesting to know, what the error messages are after you updated the (..whatever) firmware.

The basics are here: https://forscan.org/forum/viewtopic.php?f=13&t=18751

Before updating any module, ALLWAYS save the AsBuilt Data and download the factory firmware and the new firmware to your computer.
Also do the SBL programming test, before finally update the firmware.

As it seems, that you could at least download the AsBuilt files from the Ford website, try to uplaod them to you modules.
More information would be suitable.