FORScan forum

Forscan connects to my 2022 F250 (SuperDuty with 6.7L Diesel engine) but only some of the modules are found. It's not finding certain CAN modules (IPC as an example). I've tried multiple adapters (OBDLink MX+, OBDLink EX, and vLinker FS). I also tried various troubleshooting methods listed in the forum including ensuring the adapter is properly seated, deleting all vehicle profiles, various combinations of adapter settings, clearing the forscan cache, and reinstalling Forscan. Is there something I'm missing? Shouldn't Forscan detect all modules in the vehicle?

I deleted my MY2017 Escape profile and restarted Forscan. This allowed me to answer "YES" when asked if I have a MS-CAN switch. THIS FIXED IT!!
I un-installed 2.3.62 and installed the last two versions without success. AGAIN I WOULD RECOMMEND DELETING THE PROFILE IN FORSCAN AND FOLLOWING THE PROMPS SHOULD DO IT.