C-CM B142E:78 but no option to calibrate in FORScan
Posted: Sun Apr 13, 2025 4:00 pm
Hi all. Working on retrofitting adaptive cruise control on a 2024 Ford Maverick Hybrid XLT with Luxe.
I fitted a front radar (LB5T-9G768-AB), and configured various modules to recognize it. Right now I'm left with a "Front Sensor Not Aligned" error on the dash and two DTCs:
B142E:78 - Horizontal alignment incorrect
B1433:54 - Missing calibration
However, I **don't have the option to calibrate this sensor** in the service procedures section of forscan- both in release and beta.
I went ahead and flashed a firmware (NZ6T-14D049-AA) onto the radar, but this didn't change anything.
Everyone else on earth seems to have the option to start calibration with this radar- why don't I have it?
-Rubicon
I fitted a front radar (LB5T-9G768-AB), and configured various modules to recognize it. Right now I'm left with a "Front Sensor Not Aligned" error on the dash and two DTCs:
B142E:78 - Horizontal alignment incorrect
B1433:54 - Missing calibration
However, I **don't have the option to calibrate this sensor** in the service procedures section of forscan- both in release and beta.
I went ahead and flashed a firmware (NZ6T-14D049-AA) onto the radar, but this didn't change anything.
Everyone else on earth seems to have the option to start calibration with this radar- why don't I have it?
-Rubicon