Page 1 of 1
3.5 ecoboost camshaft angles.
Posted: Sat Oct 11, 2025 6:53 pm
by HOT CLUTCH
Attempting to view Desired and Actual camshaft angles on a 2011 3.5 ecoboost. Forscan is showing zero all around.
I know thats not correct. What is the issue?
Re: 3.5 ecoboost camshaft angles.
Posted: Sat Oct 11, 2025 10:12 pm
by DAN1000
If the cam angles are out more than 20 deg the pid will default to 0
Do you have cam codes?
Re: 3.5 ecoboost camshaft angles.
Posted: Sun Oct 12, 2025 1:33 am
by HOT CLUTCH
I do. Bank1 Sensor 2 P0365 and I think P0369 along with bank 1 miss fires all bank 1 cylinders.
I expected to see crankshaft correlation codes.
I suspect exhaust side phaser or chain issue.
I've used IDS and FDRS in the past and they didn't react that way as I recall. I could manipulate the VCTs to see how they reacted or didn't.