Injector test issues

[Jimmy Rasco]

Hi everyone!

I have 2003 Ford 6.0 Turbo diesel truck and I have performed many times the injector buzz test on my truck and every time it went fine (the buzzing and clicking noises as usual and a "no error found" message at end of test) but today when I started the injector test, on the progress bar when it reaches 6%, it jumps straight to 100% without any noises from the injectors and gives the "no error found" message at end of test. I repeated the test several times and checked all connections and all seems ok, but the test does not make the injectors click or buzz as it used to. However, when I put the key to the ON position in the ignition switch, I can still hear the injectors buzz every time.

Have any of you experienced this and if so, how did you resolve it? I will appreciate any help.

Thanks

Jimmy

[boosted_diesel]

Possibly try clearing the data for that vehicle out of forscan profiles. Then connect again fresh and save new profile.