I'm trying to program keys to FORD 2.2 but always getting service interupted, I have aid licence. below are the configuration modules read by FORSCAN, can you help me figure out how to program, all keys were gone
I really hope that someone can help me figure out as soon as possible
Thank you and have a very nice day
Adapter: OpenPort 2.0 J2534 ISO/CAN/VPW/PWM
Min.delay: 10 ms ( Good)
Errors: None
Vehicle:
Model: Ford Everest
Engine: Duratorq Turbo Diesel Common Rail Injection
Capacity: 2.2L
Year: 2015
Month: 10
Generation: 2015 MY
Fuel: Diesel
Transmission gear: Automatic
SYNC version: SYNC 1.1
VIN: MNCAXXMAWAFU12912
TCM - Transmission Control Module
Part number: EB3P-12B565-AB
Calibration level: EB3P-12B565-ED (latest known: EB3P-12B565-EF)
Strategy : EB3P-14C337-ED
PCM - Powertrain Control Module
Part number: EB3G-12A650-CC
Calibration level: EB3G-12A650-ACG (latest known: EB3G-12A650-ACU)
Strategy : EB3G-14C204-ACG
Hardware type: EB3A-12B684-CA
VIN: MNCAXXMAWAFU12912
OBDII - On Board Diagnostic II
APIM - Accessory Protocol Interface Module
Part number: E6BT-14D212-LA
Calibration level: E6BT-14D212-LA (latest known: E6BT-14D212-TB)
Strategy : E1BT-14D205-AG
VIN: MNCAXXMAWAFU12912
BdyCM - Body Control Module
Part number: FU5T-14B476-DAK
Calibration level: FU5T-14B476-DAK (latest known: FU5T-14B476-DAR)
Strategy : FU5T-14C184-AAH
VIN: MNCAXXMAWAFU12912
PATS programming service interupted
-
boosted_diesel
- Posts: 663
- Joined: Mon Jan 08, 2024 10:41 pm
- Vehicle: Mondeo/duratec he/1999cc/2002
Re: PATS programming service interupted
Hi there, it would help to know how far I to the process your getting?
Also you'll need to program 2 new keys when doing all keys lost on a Ford.
Also you'll need to program 2 new keys when doing all keys lost on a Ford.
Re: PATS programming service interupted
hi thank you for the response ,
yes I have 2 blank keys already, I have done this procedure on ford ranger before, but now evrytime I started service got interupted, any help will be appreciated, thanks again
yes I have 2 blank keys already, I have done this procedure on ford ranger before, but now evrytime I started service got interupted, any help will be appreciated, thanks again
Re: PATS programming service interupted
hello, I wanted to share that I was able to progran successfully 2 new key fobs, my error was in the setting configuration of the J2534 MS-CAN SUPPORT,it was set to Shared HSCAN, when I set it back to AUTO programming PATS completred successfully
-
boosted_diesel
- Posts: 663
- Joined: Mon Jan 08, 2024 10:41 pm
- Vehicle: Mondeo/duratec he/1999cc/2002
Re: PATS programming service interupted
Excellent, glad you found the solution