3.5 ecoboost camshaft angles.

[HOT CLUTCH]

Attempting to view Desired and Actual camshaft angles on a 2011 3.5 ecoboost. Forscan is showing zero all around.

I know thats not correct. What is the issue?

[DAN1000]

If the cam angles are out more than 20 deg the pid will default to 0
Do you have cam codes?

[HOT CLUTCH]

I do. Bank1 Sensor 2 P0365 and I think P0369 along with bank 1 miss fires all bank 1 cylinders.

I expected to see crankshaft correlation codes.

I suspect exhaust side phaser or chain issue.

I've used IDS and FDRS in the past and they didn't react that way as I recall. I could manipulate the VCTs to see how they reacted or didn't.