2020 Escape Titanium - PATS promgramming

[boosted_diesel]

If you go to forscan.org the main website, there are tabs there that have some of the info. It's not organised well though you'll likely have to go down the update list and see if it was added for that car yet. I think it's the update and download tabs.

[PelsonBM]

Seems like it has a ability to pats but says - "experimental (keys only w/o module initialisation)" what does it mean ? Also could be a "used" key be programmed ? Like from other car

[boosted_diesel]

Hi there, ok so it can program new keys to the car, as in add a key.
But it cannot do a pats modules initialisation. Which means if you need to do anything other than just add a key there could be issues. As if you had changed a module that was involved with pats then you wouldn't be able to marry the new module to the other immo involved modules.

Yes used keys can usually be used if smart key push button start. Just be aware that not all the keys that look the same are the same. You must match the FFCID number which is labelled and is inside the key.

Hope that clears it up.

[PelsonBM]

Yes , got it clear ! Thank you for your answers , I'll buy the key and reply here if everything went good

[boosted_diesel]

No worries good luck with it

[Keymaster561]

Patskiller.com no need nastf $30 per incode/outcode

[boosted_diesel]

There's no need to pay anyone money to access your own car with forscan. Nastf or whatever it's called is usa only. It doesn't not effect the rest of the world.

[PelsonBM]

Quick update , erased all keys from car , programmed two keys and works ! , also erased and programmed two keys on edge 2019 and 2023 two new keys on 23 edge was from china (wrong key , older one keyless not working) and for 2019 edge and 2020 escape one was original and one was China and all works perfectly

[boosted_diesel]

Glad you got it sorted

[AutoSanek]

Hurray! In the new version of ForScan (above 2.3.69) they have added the ability to program PATS for Ford Escape 4. I was able to do it