Hi, I joined a while ago when I had a Fiesta V (where life was easier with mods).
I have recently purchased a UK Fiesta Mk7.5 1.25 zetec 2017 (know as Fiesta 2013)in good nick.
I like to add mood/ambient light over the glovebox (since Ford in their wisdom removed the ambient lights LED's, including disabling it). I have also obtained the Ford bits to fit this back.
I have been scouring the Forscan, Fiesta ST and Fiestaowners forums for info to re-enable it back. But the the mood lighting doesn't work because
A) the white wire (doublechecked the black just incase) but no 12v,
B) the Ambient option in sync 1.1 does not show up in vehicle settings.
I have downloaded a Fiesta mk7.5 1.25 zetec 2016 that does have mood lighting, there are too lines that differ in 726 section, but I don't want to start changing ANY OLD bytes.
I also assume that it probably the 726-07-01 section, where there is only 9 entries in forscan (there is more thou in abt file)?
The only thing I do know (from Fiesta ST Forscan Settings.xlsx), I know 726-04-01 is to do with the TPMS and probably 726-08-01 is powerfold mirrors?
PS My fiesta also has city pack/rear sensors, so I assuming some of these differences in 726 section.
Ambient lighting Ford Fiesta mk7.5 (Fiesta 2013)
-
armouredsmiler
- Posts: 3
- Joined: Mon Dec 23, 2019 11:20 pm
- Vehicle: Fiesta, Duratec 1.25, 2017
-
armouredsmiler
- Posts: 3
- Joined: Mon Dec 23, 2019 11:20 pm
- Vehicle: Fiesta, Duratec 1.25, 2017
Re: Ambient lighting Ford Fiesta mk7.5 (Fiesta 2013)
I have also found out that 726-08-01 xxx* xxxx xxxx controls the ambient light, 1=Enable, 0=disable.
But I have checked and this is already set to enable.
But I have checked and this is already set to enable.
-
armouredsmiler
- Posts: 3
- Joined: Mon Dec 23, 2019 11:20 pm
- Vehicle: Fiesta, Duratec 1.25, 2017
Re: Ambient lighting Ford Fiesta mk7.5 (Fiesta 2013)
So , I found in the IPC modle ambient lighting and selected the ambient lighting kit 1 (is this correct for over glovebox ambient light?), this got me the White and black wires live/work as the ambient lighting for the glove box.
Still didn't have the menu option, so after much downloading of ab files for different fiesta's 2014/2015/2016 and non-ambient 2017 models, I went into APIM module and changed 7D0-01-02: 4020 003A to 7D0-01-02: 4000 001A, this then gave me the 'option' on vehicle settings menu to be able mark them off or on.
But does anyone know what is in the ambient kits mentioned (kit 1, kit 2, mono chrome?
Still didn't have the menu option, so after much downloading of ab files for different fiesta's 2014/2015/2016 and non-ambient 2017 models, I went into APIM module and changed 7D0-01-02: 4020 003A to 7D0-01-02: 4000 001A, this then gave me the 'option' on vehicle settings menu to be able mark them off or on.
But does anyone know what is in the ambient kits mentioned (kit 1, kit 2, mono chrome?