Ford Explorer 2011 Limited (Camera / Rear Sensor and Liftgate)

[wcharon]

Happy Holidays to everybody...

I am new with Forscan so i need some advice on trouble shooting to fix mu=y Explorer. I am having 3 issues which i will try to be specific on the symptoms. I did Reste DTC's to all and the only error message that appears is the Camera Module

1. Camera Module Error Code: B115E - Attached is a screen of the error. Tried to reset and the error continues. Also went to service procedure and it didn't pass 4%. Can this be a faulty camera?

2. Rear Parking Assist Proximity Sensors - Installed all new 4 sensors but don't know where to see if they are active or not.

3. Liftgate Struts - installed 2 new struts as i one was stuck. Now it opens perfectly but doesn't close automatically. Do i have to calibrate them in order to recognize and close automatically? Went to Liftgate Module but no error shows up.

Thanks in advance and any help will be appreciated....

Sorry. I can't attach the pic as i am getting a reached quota error.

[wcharon]

Trying to bump this as i still have the problem.

In order to maybe be more clear with my situation now i don't have any error code but still don't work.

Went to the BCM module and to PAM but seems that the sensors are integrated in the PAM so i can't restart that specific item in order to see if that resolves the issue.

If this helps what i find weird is that if i go to the Dash Cluster i can turn off the Proximity feature but when i turn it On it is not selected. It is like the Computer is not recognizing that it has that feature.

Appreciate any insight you guys can give me and thanks in advance.

[DAN1000]

Start a new profile & see if PAM shows up as 1 of the modules detected
Start the car & put it in reverse then back to park
Run a self test on PAM