1.6 TDCI no boost

Share your FORScan experience with other users
Post Reply
Povo

1.6 TDCI no boost

Post by Povo »

Hi,

I have a Focus 1.6 TDCi which has no power at all. The power is linear and the turbo doesn't kick in. No DTC is stored. I did some logs with Forscan and as the engine revs the MAF value is changing normally and consistently. When I am revving the engine the MAP value doesn't increase and stays at 1 bar.

Is this a problem with the boost solenoid? There is no smoke and no turbo boost leak because I cannot hear any leak noise.

Thanks.
Povo

Re: 1.6 TDCI no boost

Post by Povo »

bump
donate
Posts: 19
Joined: Mon Sep 22, 2014 10:23 am
Vehicle: Mazda 3 1.6 CRTD Y6 DPF 109 HP, 2007

Re: 1.6 TDCI no boost

Post by donate »

I have exactly the same problem. Not yet solved. I see it´s the same motor than you, so please if you solve it, tell me.

I have changed fuel filter and 2 glow plugs. But it´s a mistery what is happening here.
Mazda 3 1.6 CRTD Y6 DPF 109 HP, 2007
Povo

Re: 1.6 TDCI no boost

Post by Povo »

I found a tiny hole in the intercooling piping. You need to remove all piping from turbo to intercooler to intake manifold and look for a tiny cut or hole!
donate
Posts: 19
Joined: Mon Sep 22, 2014 10:23 am
Vehicle: Mazda 3 1.6 CRTD Y6 DPF 109 HP, 2007

Re: 1.6 TDCI no boost

Post by donate »

Thank you very much.

One more question. Having a tiny hole, ¿didn´t you have black smoke in the exhaust???
Mazda 3 1.6 CRTD Y6 DPF 109 HP, 2007
Mininu
Posts: 4
Joined: Sun Apr 26, 2015 4:55 am
Vehicle: Ford Focus 1.6 tdci 90hp

Re: 1.6 TDCI no boost

Post by Mininu »

I had the same problem. It was from the pipe who goes into the solenoid valve.
Post Reply