Well pump learn success, pilot learn success , prv counter reset "unsupported "
Strange as heard others had success .
pilot learn on mk 7 transit 2.2 tdci
-
gazsto
- Posts: 2
- Joined: Fri Oct 25, 2019 12:55 pm
- Vehicle: Ford, TRANSIT 140 T460L D/C, 2010, 2402cc, Manual
Re: pilot learn on mk 7 transit 2.2 tdci
Sorry mate, an old post but just wanted to inquire whether the injector learn worked? has the van been sorted? been a while since this post but you may still be a member. Any advice, help would be appreciated.
Read a few articles and in particular a one on the obdexpress, where a downloadable and printable (if required) guide is available 'MK7 FWD-Changing a PRV and SCV' - download link is below for those that need any help changing and indentifying the PRV and SCV -
https://docs.google.com/document/d/1nx5 ... _4TGA/edit .
States in their article after changing the PRV and SCV that a a pump learn and then an injector learn should be done. Start the vehicle prior to these learns and check for leaks and let the van run and stabilize, then power off. Once the learns have been done that reset the values and counters.
Gaz
Read a few articles and in particular a one on the obdexpress, where a downloadable and printable (if required) guide is available 'MK7 FWD-Changing a PRV and SCV' - download link is below for those that need any help changing and indentifying the PRV and SCV -
https://docs.google.com/document/d/1nx5 ... _4TGA/edit .
States in their article after changing the PRV and SCV that a a pump learn and then an injector learn should be done. Start the vehicle prior to these learns and check for leaks and let the van run and stabilize, then power off. Once the learns have been done that reset the values and counters.
Gaz
Re: pilot learn on mk 7 transit 2.2 tdci
I have same story here: viewtopic.php?f=5&t=15643 how you solved it ? what you replace?