Fiesta ST - Auto dim not working after camera install

[unearth078]

2015 Fiesta ST; Anyone have any knowledge on a fix for MFT Auto-dim no longer working, after changing 7D0-01-01 from 2130 6105 C050 to 2230 6105 C050, to enable reverse camera?
Changing it to 2A30 6105 C050 did not seem to help at all.

I have been trying to compare as built data from a 2015 titanium against my ST, but for whatever reason - AsBuiltExplorer will not display any of the Titanium AB's I download from the motorcraft site. I was able to make out the majority of AB data for the 2015 Titanium reading it strait off notepad

For APIM 7D0-01-01:
The 2015 Titanium shows 2330 6105 C052
my 2015 OEM ST shows 2130 6105 C050

Anyway to know what the last data block changes? Nothing listed on the f150 spreadsheets or the like.

Also, to enable the camera i changed 2130 to 2230; I was then told if that didn't work, go up to 2a30... Would it hurt to write the APIM to find out? I supposed i should compare current AB VS OE as well, to see if i truly only need to focus on APIM for 7D0-01-01.

[unearth078]

Flashed the Apim in my st to that of the titanium and camera still works, as well as the auto dim.
Dimming still correlates with the gauge cluster light switch as well.