I also have the exact same problem on a 2018 F150.
I am also getting "unable to read DTC" after every module as well.
It didn't happen the first time but every subsequent time it has. I don't want to make any more mods
just in case i brick a module and can't put it back.
thanks
seems to hang waiting for a response
-
Blue Lightning
- Posts: 2
- Joined: Mon May 06, 2019 11:11 pm
- Vehicle: 2018 F150 3.5 EB
-
Blue Lightning
- Posts: 2
- Joined: Mon May 06, 2019 11:11 pm
- Vehicle: 2018 F150 3.5 EB
Re: seems to hang waiting for a response
found a workaround, if you don't use a profile and re-load the modules every time it works just fine.Blue Lightning wrote: Tue May 07, 2019 8:25 pm I also have the exact same problem on a 2018 F150.
I am also getting "unable to read DTC" after every module as well.
It didn't happen the first time but every subsequent time it has. I don't want to make any more mods
just in case i brick a module and can't put it back.
thanks
Re: seems to hang waiting for a response
My first experience with FORScan was to enable the Trailer Brake Controller and Trailer Brake Gain Control in a 2017 F150 earlier this evening. When "unable to read DTC" came up I came right back to this forum and found this workaround in 2 clicks. It worked perfect. Thank you so much for taking the time to share the workaround with us. I think my F150 is now ready to tow!!!
Re: seems to hang waiting for a response
I have the same problem..