Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

[devele]

No. I don't have it,... I bought JDiag Elite-II as a little cheap and reliable, anybody who use this device please share their experience to me
thanks in advance.

[devele]

Even I tried on VINT the same thing happens, I tried it on FORD Fiesta 2010 model with Siemens ECU the programming and service procedure is not available, what could be the problem

[Norbi_wo]

Hello.
Today I used klon mongoose jlr plus (SP-205c with orginal driver for windows 7 64 bit) with forscan 2.3.29 beta. I conected with ford focus St mk4 it's perfectly worked.

[Ecmbuster]

There is another adapter used with FORScan. The original VCM I was tested and passed similar to:
CarDAQ Plus
CarDAQ Plus 2

[ahmadtow]

No. I don't have it,... I bought JDiag Elite-II as a little cheap and reliable, anybody who use this device please share their experience to me
thanks in advance.

I have JDiag elite pro II test it with Xentry and DAs and VIDA and Forscan all good will test it more when i have time

[Daone2021]

I have a Cardaq plus 1 and 2 along with original VCM II. Which one will work best with this program. Also, does this do flashing like IDS and FJDS? Or is flashing/programming only done through Ford? Thank you! New here.

[aircraftru]

Did someone is run MDI interface? Is work with GDS, but can’t figure way to run with ForSCAN

[Keithmac]

I've been using a 2 board clone VCM2 with our 2013 Kuga.

Has worked flawlessly with FORScan, did a Powershift TCU furmware update in less than 5 minutes without issue.

Wasn't the cheapest available, sourced from Germany but works a treat.

[light]

CantieCAR Ford mondeo body module programming "CAN bus compatibility problem"
any solution ??

[raftrading]

Has anyone tried a autel maxiflash j2534? I can't get forscan to find mine?