How to program PATS using FORScan v2.3.*

[twisterrescue]

IF you can still link .To old bcm save its file as old and write to replacement .If not you will need to pay FORD for the as built file and .write to new bcm

[OKI1983]

I can connect an old BCM but I don't know what file to copy? Is it possible to send any more detailed instructions? I use a translator and sometimes translate incomprehensibly.

[Andyfocus]

goto the ford web site and get your as built file it is free , just requires your vin number putting in the web site.

[OKI1983]

The file can be downloaded from the old BCM, please indicate which file it should be? How to download and where to upload in the new BCM?

[Joemamma1954]

I had purchased a Chinese knock off key/fob for my 2015 Explorer, only to read here and find I needed to order Strattech key. Got it delivered yesterday and went to locksmith to get it cut. Got home and read all these posts again and went out to program the key. First try out of the gate and it went flawlessly. I only had one key and it said there were 2 keys programmed. I used the program ignition key method and 12 minutes later it said successful. I did the ignition on/off process 8 times and fob was programmed. Now my system says 3 admin keys programmed, even though I have only 2. Thinking of cutting the cheap key and giving it a try using the 2 key method, without ForScan. Happy Camper here in ATX

[ablbd]

Hi to all

I am trying to program a 2'nd key for a Ford Ka, Europe version, model details as determined by ForScan.The unprogrammed tranponder is obviously right as it produces PATS error B1601, I have an extended licence but PATS programming option is missing, see below pictures. Does this particular model not support PATS programming or ForScan is not supporting this particular model?

[forzarreal]

Hi, I am trying to program a new key for my Ford Fiesta. One strange thing I've com across - when checking the DTC codes I noticed I get B1600-60 with both my master key and OEM replacement? Why do I get this code even with the original key which starts and runs the car?

[SHARKTEETH]

Ok so I screwed up. I bought keys from eBay and erased the keys in pats trying to program a new key. It failed and now my truck won't start.
Had a locksmith come out and try to fix this. After a hour he said something is locked up and he can't fix it.

HELP

2010 F150 4X4 5.4

[archam22]

I have a ‘13 Taurus non push w/remote start with 1 factory key (other lost) and have tried to program another one. There’s 2 keys showing in Forscan. I got the replacement cut and it’s status shows b10d7:51. When I try adding to existing keys it will run for about 15 seconds then my car will flash and cut off power and I get security access denied error. I get that error if I try running any option under PATS programming (unlimited key enable, etc).

Where is the error coming from? Key, car, adapter, Windows, Forscan? I’m running the OHP WiFi adapter, W10 latest version, ForScan extended and latest beta.

Would I need to erase all keys first then program both afterwards? I can’t be without a car so I’m a little nervous erasing and it not working. A local key place will do it for cheap so it could save me 60 or cost me 100s..

Anyone have any info on the error?

[Sito81]

Thanks a lot for this software and for this guide, I saved a lot of money and added a key to my car!