Testing firmware update function for Ford modules

[fordsmax471]

if you are using a FORScan old car profile that displays an APIM module, the old original software may have been successfully installed
I have done this once with IPC

viewtopic.php?f=13&t=13091

[JensG]

If its dead, then you are stuck.

It's not completely dead, "only" the screen is black and all sync3 buttons have no function. It shows up when scanning for modules on the HS CAN and I can also scan for DTCs (none logged) and run the module reset. On the other side the module self test gives an error: "Vehicle conditions are incorrect".

[fordsmax471]

If its dead, then you are stuck.

It's not completely dead, "only" the screen is black and all sync3 buttons have no function. It shows up when scanning for modules on the HS CAN and I can also scan for DTCs (none logged) and run the module reset. On the other side the module self test gives an error: "Vehicle conditions are incorrect".

what OBD adapter do you have

[JensG]

what OBD adapter do you have

I've the elm327 with ms/hs-can switch and the faster els27.

[benk016]

I would like to get the beta version of the software if possible. I would Like to try the module update features.

[Simy81As]

PM thank you

[phnahes]

I would like teesting this!

Because I need reprogram my Ford Focus mk3.5 PAM module, for flank guard works...

[mandelbloom]

Is it possible to get 2.4 now? I upgraded my 19 Ford Ranger to 3.4 and wanted to upgrade the APIM unless that is not recomeneded?

Thanks!!

[hwk]

Can I also sign up for 2.4 beta, please?

[cfhgarza]

Are you still accepting new testers? I need to calibrate my APIM for it to be able to display radio logos and I don't want to pay a dealership to do it.