How to program Central Configuration using FORScan

[Gary_Robinson]

2011 Transit Connect - I don't get a Central Config selection is this normal for this vehical?
I don't get engineering 1 or 2 either of course.

[estebanfree]

I have same problem. did you find any solution about it? thanks

[Dex]

2011 Transit Connect - I don't get a Central Config selection is this normal for this vehical?
I don't get engineering 1 or 2 either of course.

Engineering 1 or 2 is part within central configuration (CC), so if you dont have CC then you cant see engineering.
Idk if that car have CC or not.
But if you use right adapter and all modules get readed (hs and ms can) then you dont have it.
After conection to vehicle forscan first read modules from one can, then ask user to change switch to other can and after user confirmation forscan read that second can.
If thats the case and all pass like i writed, then you have proper adapter and your car dont have CC.

[296353809]

Mazda AB obtains the website using the IE browser of Windows 7, the version is IE9

Link is https://web.b2b.mazda.co.jp/AsBuilt/Com ... rPage.aspx

[RSWRC]

Hello, I use Ford VCMM for Forscan.
I understood correctly that if I want to change the SW version of eg IPC unit from the original: JM2T-14C026-JF to: JM2T-14C026-JD
So I will write and download it according to the instructions here: https://www.fordtechservice.dealerconne ... rogram.asp
And using Forscan will I load another SW?
The point is that this new SW shows the range of fuel over 1000km. Not up to 999km.
My VIN: WF0JXXWPCJKE82913
VIN of the mentioned vehicle: WF0JXXWPCJJB69847

They are the same almost the same. It's just a different date of manufacture.
Thank you

[zivnic]

Hello, do you know any one as-built data for setting DRL in "0" position in Focus MK4? When I have it now on "0", all lights are off. But when I had Puma for few days from Ford, there was DRL also on "0" and also in Mondeo MK5 we have it like that. Thank you.

[mustafakartal]

2010 Fiesta ya 2012 USB li teyp ünitesi taktım USB yi aktif etmek için forscande ne işlem yapmam lazım

[f-wolf]

2010 Fiesta ya 2012 USB li teyp ünitesi taktım USB yi aktif etmek için forscande ne işlem yapmam lazım

https://www.google.com/search?q=transla ... &ie=UTF-8

[mustafakartal]

I inserted a 2010 fiestama 2012 tape, what should I do to work with usb

[mustafakartal]

I inserted a 2010 fiestama 2012 tape, what should I do to work with usb