Hi guys
I have a 2017 lincoln mkz and I was trying to update the IPMA with 2.4.4. However the car powered off in the middle of the process and now I get DTC U3000:96 and lka is not working.
Is there any way to bring it back or I have to replace the module?
Thanks.
IPMA bricked while updating
-
alfredfenglq
- Posts: 3
- Joined: Mon Nov 05, 2018 11:22 am
- Vehicle: Lincoln MKZ 2.0T 2017
-
fordsmax471
- Posts: 1302
- Joined: Mon Aug 07, 2017 5:29 pm
- Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift
- Location: EST
Re: IPMA bricked while updating
we can try to fix it on Thursday or Friday 
send vin pm
send vin pm
-
alfredfenglq
- Posts: 3
- Joined: Mon Nov 05, 2018 11:22 am
- Vehicle: Lincoln MKZ 2.0T 2017
Re: IPMA bricked while updating
Thank you, vin has been sent
Re: IPMA bricked while updating
Hi
I have the same issue, when i starts the firmware updates, and it is starts smoothly till reaches 89% (around 32 mins) and then the car shuts down.
plz help if you solve it
I have the same issue, when i starts the firmware updates, and it is starts smoothly till reaches 89% (around 32 mins) and then the car shuts down.
plz help if you solve it
-
alfredfenglq
- Posts: 3
- Joined: Mon Nov 05, 2018 11:22 am
- Vehicle: Lincoln MKZ 2.0T 2017
Re: IPMA bricked while updating
I got a ford engineer to help me fix it.Islamkh wrote: Sat Nov 27, 2021 2:06 pm Hi
I have the same issue, when i starts the firmware updates, and it is starts smoothly till reaches 89% (around 32 mins) and then the car shuts down.
plz help if you solve it
He has replaced flash inside the module and reflash the 081file with ucds.
Re: IPMA bricked while updating
I couldn't get ucds, they not deliver to my region, so i need to try fixing it through forscan,