FORD EPB THE TROUBLES I GETTING !

[GREEVES246]

Right i have been invetigating why my obd 2 will not connect with the car its due to bad obd socket ! the femail connection has been speard and will not connect i used two obd units same result loss or bad connction ! so you have to remove the socket and genntly squeeze the contacts to make connection then should be on down to a physical problem also another one is the cam on the key barrel can be worn and not enguage with the switch.

gary gwillam

[GREEVES246]

Hi i found afterwards the bcm has bad connections with plugs and has had burning going on on some connections from the engine compartment to bcm
i have downloaded forscan and have a second bcm coming off a donor vehicle can anyone one help advise me asni am somewhat of a armature to car reprogramming and have joined for friendly advise please..

gary gwillam

[GREEVES246]

dont know how to post on here but here goes i got trouble with A 2005 DM2 CMAX the epb will lock but not unlock error code b2992 also got b1353 as well also showing a short on heater plug poss relay ? anyone got over this and had these troubles ?