my vgate with forscan does not enter the pcm configuration module

[Brianpedroso]

My vgate vlink reads all the modules but it does not enter the PCM configuration, it says that it has stopped. I tried the stable version and the beta version and neither of the two can enter the module.

[mulaluma]

Hi Brian,

which Vgate Vlinker do you use ? There are so many different models .
Also important how do you use the Vgate Vlinker ? Laptop with Windows and USB, Bluetooth ?
Which type of License do you have ? Standard or Extended forscan license ? With the Standard license you only have limited acces to some features.
viewtopic.php?f=5&t=18697

Which Car: Model, Year, Module version... etc.

With the basic information you are giving to the community, nobody will be able to help you.
Also a screenshot would be helpful .

Greetings,

[Brianpedroso]

Hello thanks for answer


I always use forscan beta on the latest version on my laptop with windows 11 home and vgate vlinker fs usb v2.3 cable extended one year license

My car is a 2018 Ford Edge SEL 3.5L v6 TIVCT FWD I am in the United States

PCM - Part number: G2GA-12A650-CAA
Calibration level: H2GA-12A650-BJC
Strategy : H2GA-14C204-BJC
Hardware type: FL3A-12B684-BEA / FL3A-12B684-BEB
VIN: 2FMPK3J82JBC30570

I hope this information helps to improve Forscan. I have read everything about programming and I proceed carefully, since I am getting updates for modules that are not for my car. When I do the test with the engine running it also stops at 50%. Regards.