FORScan forum

fordsmax471 wrote: Sat Sep 19, 2020 12:50 pm if this still does not work, install the files separately

1.
...21..
...19..
...82..

do not turn the ignition off

2.
...21..
...24..

do not turn the ignition off

3.
...21..
...81..

Thanks a lot for the answer, one more question please, how can I deactivate "System Off Battery Saver" from sync ? thank you

fordsmax471 wrote: Sat Sep 19, 2020 12:50 pm if this still does not work, install the files separately

1.
...21..
...19..
...82..

do not turn the ignition off

2.
...21..
...24..

do not turn the ignition off

3.
...21..
...81..

I finally managed to separate modules I upload as you said, thank you very much

How do you install the files separately?

you select custom at the top and then only the secondary boot loader (sbl) and the file you want to write separately. Leave all the other options blank.

Snowball wrote: Mon Sep 28, 2020 10:38 pm you select custom at the top and then only the secondary boot loader (sbl) and the file you want to write separately. Leave all the other options blank.

Is it too much trouble to ask for a screenshot if you can. Thanks.

Snowball wrote: Mon Sep 28, 2020 10:38 pm you select custom at the top and then only the secondary boot loader (sbl) and the file you want to write separately. Leave all the other options blank.

exact !!!

so i have the same problem with the ipma it upload them all then fails on the last one tried doing just the last one as a custom still a no go goes to 97% then shows a failure? Any other ideas? running 2.4.3 test20200917

this is a image

rmorriso86 wrote: Thu Nov 12, 2020 6:40 pm this is a image

https://www.forscan.org/forum/viewtopic ... 444#p55444