FORScan forum

IJY1992 wrote: Fri Jan 23, 2026 4:09 pm Hi can anyone help me get hold of EK31-14C204-ANH or a newer version of it? just replaced a PCM on a MK8 FWD Transit with a used one and cant seem to get my hands on the correct firmware. it seems forscans built in downloader will only allow me to download a version that is compatible with the currently installed software rather than one that's compatible with the van

Download link for EK31-14C204-ANH
https://disk.yandex.com/d/QHNxNW3LaiT37w

Hello everyone! Last year i made a mistake to update my firmware for door modules (pdm and ddm) and it was worse for me that my rear one touch windows stop working as one touch they are opening with every press some inches.

Its around one year to wait for the correct firmware but its not available now. So i need correct data for my door modules if anyone have similar.

I own Ford focus ST line 2016-2017 EU .

Thank You in advance

devn89 wrote: Sat Jan 24, 2026 11:47 am Hello everyone! Last year i made a mistake to update my firmware for door modules (pdm and ddm) and it was worse for me that my rear one touch windows stop working as one touch they are opening with every press some inches.

Its around one year to wait for the correct firmware but its not available now. So i need correct data for my door modules if anyone have similar.

I own Ford focus ST line 2016-2017 EU .

Thank You in advance

What firmware files does FORScan show are needed? Do you have a paid licence & 2.4.20 to download the files?

Hi all,

Reading this thread and have same issue trying to download the file

I am looking for : DV6T-14C097-AB

Any help appreciated

daisycutteruk wrote: Sun Jan 25, 2026 8:04 pm Hi all,

Reading this thread and have same issue trying to download the file

I am looking for : DV6T-14C097-AB

Any help appreciated

I saw a post elsewhere & it looks like you've made the same mistake as many other people. The file has likely downloaded & saved wherever you told it to save to & you haven unzipped it to the folder shown in your image on FB. The file is also in the files section of the FB group.

Hello! Thank you for your reply. These are showing something like this. I am not able to upload images so pasting text format.

DDM Module firmware update

Part number: F1ET-14B531-BG | Available:
Calibration level: F1ET-14B531-BG | F1ET-14B531-BG
Hardware Number: F1ET-14F142-BC | F1ET-14F142-BC
Secondary Boot Loader: F1ET-14C067-AB | F1ET-14C067-AB
Strategy (CAN, F188) F1ET-14C064-AG | F1ET-14C064-AG
Calibration (CAN, F124): BLANK | BLANK
Signal Configuration (CAN, F108): BLANK | BLANK
ECU Configuration /Base
Configuration (CAN, F10A) F1ET-14C637-AB | F1ET-14C637-AB

PDM Module firmware update

Part number: F1ET-14B533-BG | Available:
Calibration level: F1ET-14B533-BG | F1ET-14B533-BG
Hardware Number: F1ET-14F144-BC | F1ET-14F144-BC
Secondary Boot Loader: F1ET-14C111-AB | F1ET-14C111-AB
Strategy (CAN, F188) F1ET-14C108-AG | F1ET-14C108-AG
Calibration (CAN, F124): BLANK | BLANK
Signal Configuration (CAN, F108): BLANK | BLANK
ECU Configuration /Base
Configuration (CAN, F10A) F1ET-14C639-AB | F1ET-14C639-AB

Hi, I have this file but i don't know how to attach it for you?

daisycutteruk wrote: Sun Jan 25, 2026 8:04 pm Hi all,

Reading this thread and have same issue trying to download the file

I am looking for : DV6T-14C097-AB

Any help appreciated

Hello there fellow ForScanners, i'm looking for the KK3A-14C204-AVL vbf file if someone has it and if not, then the latest available update before AVL which is AVK will do.

Thanks

2017 Cab and Chassis F350 6.7L Diesel needing to re-calibrate ECM and TCM to Stock pickup calibration (NOT Cab and Chassis) found a vin same year and configuration in a pickup.

Current VIN: 1FD8W3HT0HEE91701
Needed Cal files for VIN: 1FT8W3DT7HEB27656

Current Cal level available are
K3A-12A650-BDA
K3A-12A650-BDB
K3A-12A650-BDC
K3A-12A650-BDD
K3A-12A650-BDE
K3A-12A650-BDF
K3A-12A650-BDG
K3A-12A650-BDH

Can you give me a specific Strategy Number or the Part Number of the Module containing the correct branch of Firmwares you need?