Page 24 of 25
Re: How to program Central Configuration using FORScan
Posted: Thu Aug 03, 2023 10:15 pm
by redrum678
Ecmbuster wrote: Thu Aug 03, 2023 9:51 pm
Motorcraftservice does work, I was just there and copied the information.
does not work to DOWNLOAD files.even if you try other calibration files youll get the same thing or end up with a DSFM_downloadFile
Re: How to program Central Configuration using FORScan
Posted: Thu Aug 31, 2023 5:59 pm
by Rodrigo
notmoby wrote: Sun Jul 17, 2016 6:58 pm
Happy to report success enabling powerfold mirrors and puddle lights on a mk 7.5 Fiesta. Extended licence and Engineering mode needed in Central Configuration. Good work chaps!
Hello colleague, I'm glad you got it, but could you help me with the wiring, after activation which module pinout did you use and which module?
Re: How to program Central Configuration using FORScan
Posted: Mon Sep 11, 2023 9:53 am
by SkyNet
Hello
MUSTANG 14 years old
3.7b
Will we be able to change all the data in ABS?
All testers change to used only; 760-01-01 (026B)
I have faults: U201A / U2101
thank you in advance for your help
Re: How to program Central Configuration using FORScan
Posted: Sat Oct 21, 2023 7:25 pm
by rtservicesolution
I have a 2020 T250 transit. I used to be able to access engineering mode but now can not find it anywhere. It has been months since I have had forscan connected, something has to have changed somewhere??
Can anyone PLEASE help me out??? I am changing my outside mirrors and no longer have access to engineering mode that I used to see which allowed me to select which mirror my van had. Any and all help is deeply appreciated. I really need to get the new heated mirrors up and running before winter. This van is dangerous to operate in ice conditions as it is 100% cargo without windows. Changing lanes and backing up is not safe with frozen mirrors.
Re: How to program Central Configuration using FORScan
Posted: Tue Nov 07, 2023 11:50 am
by ecosolux
Hello friend,
I have Ford Ecosport 2015 with abs fault - U3000-68
i need this files:
CN15-14C602-11
Thanks in advanced!
Re: How to program Central Configuration using FORScan
Posted: Thu Oct 09, 2025 10:30 am
by dareklajka
WITAM
Mam problem z błędem U2300-51 KONFIGURACJA CENTRALNA - NIE ZAPROGRAMOWANY FORD GRAND C-MAX
zaczęło świecić po wyłączeniu kontrolowania ciśnienia w oponach
świeci teraz ABS, KONTROLA TRAKCJI ORAZ MODUŁ ODPOWIEDZIALNY za WSPOMAGANIE RUSZANIA POD GÓRĘ
Co muszę zrobić, żeby przywrócić te parametry ?
nie chciał bym coś zepsuć, żeby nie posypało się dalej
Proszę o pomoc
Dziękuję za odpowiedzi
HELLO
I'm having a problem with error code U2300-51 CENTRAL CONFIGURATION - NOT PROGRAMMED FORD GRAND C-MAX.
It started flashing after I disabled the tire pressure monitoring system.
Now the ABS, TRACTION CONTROL, and HILL START ASSIST MODULE are lit.
What do I need to do to restore these parameters?
I don't want to damage anything and cause further problems.
Please help.
Thank you for your replies.
Re: How to program Central Configuration using FORScan
Posted: Thu Oct 09, 2025 9:07 pm
by boosted_diesel
If you saved a copy of the configuration prior to making ch ages then just load that back into it.
Re: How to program Central Configuration using FORScan
Posted: Mon Oct 13, 2025 7:50 am
by Expat_Zach
dareklajka wrote: Thu Oct 09, 2025 10:30 am
WITAM
Mam problem z błędem U2300-51 KONFIGURACJA CENTRALNA - NIE ZAPROGRAMOWANY FORD GRAND C-MAX
zaczęło świecić po wyłączeniu kontrolowania ciśnienia w oponach
świeci teraz ABS, KONTROLA TRAKCJI ORAZ MODUŁ ODPOWIEDZIALNY za WSPOMAGANIE RUSZANIA POD GÓRĘ
Co muszę zrobić, żeby przywrócić te parametry ?
nie chciał bym coś zepsuć, żeby nie posypało się dalej
Proszę o pomoc
Dziękuję za odpowiedzi
HELLO
I'm having a problem with error code U2300-51 CENTRAL CONFIGURATION - NOT PROGRAMMED FORD GRAND C-MAX.
It started flashing after I disabled the tire pressure monitoring system.
Now the ABS, TRACTION CONTROL, and HILL START ASSIST MODULE are lit.
What do I need to do to restore these parameters?
I don't want to damage anything and cause further problems.
Please help.
Thank you for your replies.
Command ABS to relearn from central configuration. It’ll take the data from the central configuration showing that TPMS is not installed and update accordingly. I tried this for fun on my Ranger when I disabled the 4x4 and set it to be a 2WD. ABS, and traction errors were set. I told the ABS module to do a relearn, and the problems went away once it was done. I was able to revert back to AWD settings with no issues.
I’m not sure if it’ll work on a C-Max or not, but it’s worth a try.
Re: How to program Central Configuration using FORScan
Posted: Mon Dec 15, 2025 11:07 am
by syhun
HELLO, IS THERE ANYONE WHO CAN HELP?
HOW TO OPERATE WINDOW LIFT AND HORN ON A FORD COURIER 1.6 DELUXE
Re: How to program Central Configuration using FORScan
Posted: Fri Jan 30, 2026 12:00 pm
by torente81
hello! I am a new forscan user and I need the table with the values to deactivate certain functions (seatbelt,line assist,etc) where can I find the table?