FORScan forum

Help! !! !! v2.4.0.test202000121 refreshes BCM crashes
ESL27, the firmware update is automatic, everything is normal during the update, after the update, the car does not respond after opening the key, just like the power failure, now the OBD is no longer connected Current status video
https://drive.google.com/file/d/1OH1Vu9 ... sp=sharing

https://youtu.be/H6-Yfd6xD-o

Using ELS27 to update the firmware, now the car is like a power outage

if you used the original OBD adapter, this is not the cause of the malfunction

please describe the software update in more detail

could be a video of the current situation

Current status video

https://youtu.be/H6-Yfd6xD-o

switch ignition on and connect the OBD adapter
can you get the connection and what the error codes are and so on.

switch ignition on and connect the OBD adapter

ok
we check if the adapter and software are okay

connect the adapter to the computer and run FORScan without the car

if you still have an old profile then press "YES"

if the adapter and software are in ok you should get such a picture

then check all fuses

https://www.autogenius.info/ford-f-150- ... x-diagram/

and also measure the OBD connector on the multimeter

Thank you very much, try it tomorrow, but the configuration file has been deleted. I still have a 2019 F150 that can read the configuration file. Can it be used?