2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 4:37 pm
my 2014 explorer ipc fireware flash faild .
forscan ver ?
obd adapter ?
FORScan forum
Software scanner for Ford, Mazda, Lincoln, Mercury vehicles
https://forum.forscan.org/
2014 explorer ipc flash faild
Page 1 of 2
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 4:44 pm
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 4:47 pm
2.4.3 test20200920 with extended license ,openport 2.0 J2434 , flash other HS module all ok except ipc !
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 4:57 pm
did you try that too ?
- 1.png (15 KiB) Viewed 2259 times
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:06 pm
you must program the IPC files separately 
first programming---> SBL: boot and Strat: 26-...
second reprogramming---> SBL: boot and Calib: 88-...
first programming---> SBL: boot and Strat: 26-... second reprogramming---> SBL: boot and Calib: 88-...Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:13 pm
I used stop activity buses
how flash one by one ,use "stop activity buses" ?
how flash one by one ,use "stop activity buses" ?
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:16 pm
first test at the beginning without modification "stop activity buses"fbstn wrote: Mon Oct 19, 2020 5:13 pm I used stop activity buses
how flash one by one ,use "stop activity buses" ?
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:17 pm
only this
first programming---> SBL: boot and Strat: 26-...
second reprogramming---> SBL: boot and Calib: 88-...
i hope you have a backup of the IPC as built data as it needs to be reloaded after a successful installation
first programming---> SBL: boot and Strat: 26-...
second reprogramming---> SBL: boot and Calib: 88-...
i hope you have a backup of the IPC as built data as it needs to be reloaded after a successful installation
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:30 pm
first programming---> SBL: boot and Strat: 26-... don't use stop buses
second reprogramming---> SBL: boot and Calib: 88-...use stop bues
is it right?
second reprogramming---> SBL: boot and Calib: 88-...use stop bues
is it right?
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:32 pm
nofbstn wrote: Mon Oct 19, 2020 5:30 pm first programming---> SBL: boot and Strat: 26-... don't use stop buses
second reprogramming---> SBL: boot and Calib: 88-...use stop bues
is it right?
first programming---> SBL: bootloader and Strat: ET4T-14C026-BL
and
second reprogramming---> SBL: bootloader and Calib: ET4T-14C088-BL