Possibly bricked ABS module on 2012 Fiesta
Posted: Sun Aug 20, 2023 9:16 pm
I broke the ultimate rule "If it ain't broke, don't fix it" by attempting to upgrade firmware on ABS module.
This is a screenshot I grabbed after failure, should have snapped one before...
Full log attached also but this is the log for first failed flash of ABS module
As a last resort I tried recovery flash without checksum check, and then disconnected the ABS module and reconnected it when prompted to.
Logs will show same results for multiple attempts. Flashing previous version also did not work.
This is a screenshot I grabbed after failure, should have snapped one before...
Full log attached also but this is the log for first failed flash of ABS module
Code: Select all
(OK) [15:33:51.040] ABS Module firmware update has been started
(WARN) [15:33:51.053] Reading vehicle info...
(WARN) [15:34:15.602] Downloading firmware files from the Internet...
(OK) [15:34:17.634] Downloading AE81-2D052-AA: OK
(OK) [15:34:19.680] Downloading CE81-2D053-AB: OK
(OK) [15:34:19.713] Downloading CE81-14C602-AC: OK
(WARN) [15:34:36.493] Total size: 577.2 Kb. Estimated duration: 1m - 2m
(WARN) [15:34:39.795] Loading SBL to primary module...
(WARN) [15:34:40.635] Loading block 1/1...
(OK) [15:34:40.753] SBL loaded successfully
(WARN) [15:34:40.773] Loading firmware to ECU: Strategy CE81-2D053-AB
(WARN) [15:34:40.774] Erasing block 1/3...
(WARN) [15:34:40.972] Erasing block 2/3...
(WARN) [15:34:41.164] Erasing block 3/3...
(WARN) [15:34:43.043] Loading block 1/7...
(WARN) [15:34:43.163] Loading block 2/7...
(WARN) [15:34:43.372] Loading block 3/7...
(WARN) [15:34:43.404] Loading block 4/7...
(WARN) [15:34:44.683] Loading block 5/7...
(WARN) [15:34:44.701] Loading block 6/7...
(WARN) [15:35:40.874] Loading block 7/7...
(OK) [15:35:41.003] Firmware loaded successfully
(WARN) [15:35:41.017] Loading firmware to ECU: ECU Configuration/Base Configuration CE81-14C602-AC
(WARN) [15:35:41.018] Erasing block 1/1...
(WARN) [15:35:41.308] Loading block 1/3...
(WARN) [15:35:41.398] Loading block 2/3...
(WARN) [15:35:43.468] Unable to obtain downloaded block checksum from ECU, so cannot verify download
(WARN) [15:35:43.472] Operation failed, retrying...
(WARN) [15:35:43.587] Operation failed, retrying...
(WARN) [15:35:43.704] Operation failed, retrying...
(ERR) [15:35:43.915] Loading firmware failed
(ERR) [15:35:44.876] Service procedure has been interruptedLogs will show same results for multiple attempts. Flashing previous version also did not work.