Swap steering wheel controls

Discussion about adapters and connections - usage, problems, solutions
Post Reply
Espeacke
Posts: 4
Joined: Sat Apr 06, 2024 5:57 am
Vehicle: Focus ST 2014 2.0T

Swap steering wheel controls

Post by Espeacke »

Image

hello. i would like to know if there is any way to swap steering wheel controls from the 5 left controls to the right and vice versa.

i have tried crossing the cables but as you can see in the photos

Image
Image

they are only GDN - PWR + and two more that i imagine are “Can Low and High”. i have also tried to swap the “circuit boards” of each control but they are different, they do not fit well.

i would like to know if there is any way through software or CANBUS (keeping the original stereo sync 3??
Top
Ghano38
Posts: 935
Joined: Sat Dec 07, 2019 9:10 am
Vehicle: Ford c max

Re: Swap steering wheel controls

Post by Ghano38 »

There’s no can bus wires in the steering wheel,all control buttons work with resistors.
Top
Post Reply

Return to “Adapters & Connection”