FORScan forum

good evening, here is my configuration: Mustang GT 2018, Forscan 1 year licence and ODBLINK EX adaptator.
I don't have access to the all modules, for exemple not access BdyCM : what should I do?

seb5091 wrote: Sun Feb 22, 2026 7:10 pm good evening, here is my configuration: Mustang GT 2018, Forscan 1 year licence and ODBLINK EX adaptator.
I don't have access to the all modules, for example not access BodyCM : what should I do?

See if this works:

Delete the FORScan Profile

FORScan often caches the vehicle configuration from the first time it was connected. If you added hardware, it won't show up.
Go to the Profile tab in FORScan.
Delete the stored profile for your 2018 Mustang.
Reconnect and select "No" when asked to use the cached profile to force a full, fresh read of the vehicle network.


MS-CAN (Medium Speed): Required for the Body Control Module (BCM), IPC, and HVAC.

HS-CAN (High Speed): Used for PCM, ABS, and Transmission modules.

It works, thank you very much

seb5091 wrote: Mon Feb 23, 2026 8:26 am It works, thank you very much

Thank you for getting back with the good news !!