FORScan forum

Hi to everybody, iv just change parameters on IPC and i have now the menu on IPC. But now what parameters i have to edit on IMPA?

I though
706-01-01 xxxx 55A9 xxxx
on 706-01-01 xxxx 55B2 xxxx but it doesnt work.

have any idea?

Not yet...

Here on the IPC, both circles are active now aswell, but the IPMA needs to give the data to the system now

I wonder if there are different versions of the IPMA used?

I don’t understand what you mean...
With the activation on IPC I have the menu and the possibility of activate the tsr but with only empty 2circles.

To activate all you have to change parameter on impa but I don’t know what parameters have to write...

Silly question but you do have sat nav working in your car?
I lost my sat nav for some unknown reason and lost sign recognition on my IPC unless the camera picked up a speed sign.

So not only do you need to activate that feature you also need a working sat nav

I have working sat nav. After the changed parameters on IPC I have the empty circles on the right of display. I need only to change parameters on impa I think.
But I don’t know what sector I have to edit

send me a message with your VIN number so i can look up its as built coding and then i can compare it against my mondeo and see if i can spot anything and get back to you if i do.

Pm sent but we don’t understand what kind of parameters have to change.

Anyone know solution?

@C.piano
Can you explain how to add TSR in the IPC menu with forscan on the mk8 ?

For IPMA 706-01-01 you have xxxx 55A9 xxx as me , on another MK8 vignale 2018 as built with factory TSR, the value is xxxx 99DA xxxx

Thanks

“Writing block failed” - incompatible configuration.

Isn’t possible change 706-01-01. Damn

I will write what need to change in ipc, now I have to go work... tomorrow and I will exit from work at 21.30 Italy. Tomorrow I will write you what need to change in IPC