FORScan forum

Hi everyone,

I want to disable the TPMS on my 2018 Ford Grand Tourneo Connect completely (-> No alarms if batteries go bad or no sensors are installed)

This is what I did so far:

(1) Under: BCMii-Module-CentralConfig(Main) I set TPMS from "TPMS FedRed EU" to "Without TPMS":
BCMii-Module ...

Hi fcoplo,

thanks for your help!

Did you also try to filter for "light" in the IPC Module config? Maybe it's not a "chime" but some other sort of "warning" etc...

I would need two files from you:

* The IPC Module config file (UCDS/XML)
* The AsBuilt File (ABT) from the AsBuilt Menu

I will then ...

@ fcoplo : VERY interesting!!! But even your two adapters seem not to have the same options?!

I ran a quick compare of the two pictures you sent:
compare.png

Left hand side is adapter No. 1 and on the right hand side is No.2 (ELM327 with switch)

I just went over the information about TRIAL vs ...

All chimes messages come from IPC module, look there using the filter "Chimes" , of course in configuration menu (not as built)


I looked into my Forscan to see which options I have.

I use the suggested CAN-adapter from this homepage: USB adapter OBDLink EX from Amazon

These are the only ones ...

Hi there,

I would like to have a feature to simulate a connection to my vehicle, if it was previously connected.

Every time I connect Forscan 2.3.35 to my vehicle I am asked, if the vehicle detected is the correct vehicle I wish to connect to.

I suspect Forscan to save some information of my ...

Hi there,

I would like to get rid of the "Lights on" chime, when ignition is off and door is ajar and the light switch is not at "0".

I do not understand the reason for the chime sound, because all lights are actually off, even when I have the light switch in "on" position (not in "parking light ...

Hi!

Is this the correct way of disabling BMS?

BMS.PNG

I only have this option "Battery Monitor Sensor" related to the Battery Management in my BCMii configuration menu.

The factory setting was "02 - With Battery Monitor sensor", I changed it to "01 - Without Battery Monitor sensor".

Does my ...

also upgraded my battery to an AGM-type (2016 Transit Connect). I disabled BMS because I don't think it is ideal for an AGM.


Hi there,

I own a Ford Tourneo (= Transit) Connect 2018.

I am also close to a battery change - before this winter anyway!

Right now I have a Varta 80 Ah battery ...