REMOTE START
Re: REMOTE START
Only works on 2023-> dunno why. I haven't tried on the Mondeo but on the ranger only the next gen works on both key types
Re: REMOTE START
Does anyone know why the auxiliary heater is not starting when remote start the car? When I start driving it starts after 1 minute.
Re: REMOTE START
Crusader wrote: Sat Mar 02, 2024 11:11 am hi everyone,
i have fiesta mk8 1.0 auto keyless entry
i did
BCM module- configuration parameters
• Remote start - enable
Hood Switch enable
IPC module - configuration parameters
Hood switch enable
• Remote start - enable
• Remote start - climate settings- enable
i have all 3 keys working but my problem is HOOD AJAR LIGHT WARNING . i dont have hood ajar sensor
remote start one beep problem
https://www.youtube.com/watch?v=scds5mI ... el=WoneOne
i have same problem any idea how can i fix hood ajar light warning
![]()


Short-circuit the idle uranium leads.
https://youtube.com/shorts/uIQtbx-Xg64? ... m4aFvnaa44
Re: REMOTE START
Cagdas wrote: Sun Jun 29, 2025 12:11 pmCrusader wrote: Sat Mar 02, 2024 11:11 am hi everyone,
i have fiesta mk8 1.0 auto keyless entry
i did
BCM module- configuration parameters
• Remote start - enable
Hood Switch enable
IPC module - configuration parameters
Hood switch enable
• Remote start - enable
• Remote start - climate settings- enable
i have all 3 keys working but my problem is HOOD AJAR LIGHT WARNING . i dont have hood ajar sensor
remote start one beep problem
https://www.youtube.com/watch?v=scds5mI ... el=WoneOne
i have same problem any idea how can i fix hood ajar light warning
![]()
Short-circuit the idle uranium leads.
https://youtube.com/shorts/uIQtbx-Xg64? ... m4aFvnaa44
It's been a long time since I solved the problem
-
LongingIngernot
- Posts: 2
- Joined: Thu Jan 04, 2024 3:23 pm
- Vehicle: 2017 Ford Kuga Diesel 2.0 150 HP PowerShift
Re: REMOTE START
Finally did it!!LongingIngernot wrote: Sun Jan 05, 2025 10:10 am Hello! I am trying to enable Remote Start on my 2017 Kuga 2.0 Diesel Powershift. I have enabled it in BCM, IPC, and RFA. When trying to remote start, it tries to start but fails, logging DTC P027C in PCM. I have spoken to someone in Russia, and apparently, I need to edit the Fuel pump type. He said it could be done with UCDS. Can it also be done with Forscan? Could someone help me?
Remember: If there is will, there is way and the sky is the limit!
Re: REMOTE START
I start the car remotely and get in. I press the start button and the screen says "See the service manual." When I start it normally, no warning appears.Crusader wrote: Wed Jul 02, 2025 7:50 pmCagdas wrote: Sun Jun 29, 2025 12:11 pmCrusader wrote: Sat Mar 02, 2024 11:11 am hi everyone,
i have fiesta mk8 1.0 auto keyless entry
i did
BCM module- configuration parameters
• Remote start - enable
Hood Switch enable
IPC module - configuration parameters
Hood switch enable
• Remote start - enable
• Remote start - climate settings- enable
i have all 3 keys working but my problem is HOOD AJAR LIGHT WARNING . i dont have hood ajar sensor
remote start one beep problem
https://www.youtube.com/watch?v=scds5mI ... el=WoneOne
i have same problem any idea how can i fix hood ajar light warning
![]()
Short-circuit the idle uranium leads.
https://youtube.com/shorts/uIQtbx-Xg64? ... m4aFvnaa44
It's been a long time since I solved the problem
Has this happened to you too?
Re: REMOTE START
Yes, cause you don't have hood sensor.Cagdas wrote: Thu Jul 10, 2025 4:12 pmI start the car remotely and get in. I press the start button and the screen says "See the service manual." When I start it normally, no warning appears.Crusader wrote: Wed Jul 02, 2025 7:50 pmCagdas wrote: Sun Jun 29, 2025 12:11 pm
Short-circuit the idle uranium leads.
https://youtube.com/shorts/uIQtbx-Xg64? ... m4aFvnaa44
It's been a long time since I solved the problem
Has this happened to you too?
Re: REMOTE START
PCM P166A:00-AE additional security system activation communication errorCrusader wrote: Sat Jul 19, 2025 5:31 pmYes, cause you don't have hood sensor.Cagdas wrote: Thu Jul 10, 2025 4:12 pmI start the car remotely and get in. I press the start button and the screen says "See the service manual." When I start it normally, no warning appears.
Has this happened to you too?
-
marpi82
- Posts: 2
- Joined: Fri Jul 11, 2025 7:06 pm
- Vehicle: S-MAX 2.0 TDCi/179PS, AWD, PowerShift 2016
Re: REMOTE START
Can anyone tell me what does this change in the RTM module exactly do?fordsmax471 wrote: Fri May 22, 2020 12:18 pm • if the new key does not work immediately then change RTM module AsBuilt value 751-01-01 x2xx xxxx
- fordsmax471
- Posts: 1302
- Joined: Mon Aug 07, 2017 5:29 pm
- Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift
- Location: EST
Re: REMOTE START
I don’t quite remember anymore, but I think it was related to 433 or 434 MHz. If your key has the same frequency as the original, then you don’t need to change the values.
My Chinese key works without me having to change the value, but another key needed a value change on my friend’s car.
My Chinese key works without me having to change the value, but another key needed a value change on my friend’s car.