TPMS locations gone after programming digital dash

Car configuration discussions and experience sharing
Post Reply
miles5600
Posts: 11
Joined: Sun Feb 09, 2025 2:16 pm
Vehicle: fiesta MK8 2018

TPMS locations gone after programming digital dash

Post by miles5600 »

after I wrote the original As Built from my analog IPC to the digital IPC from the fiesta mk8.5 I lost the ability to see tire pressure information and location, is this not available on the digital IPC's?
it's an IPC from a mk8.5 in a mk8
boosted_diesel
Posts: 663
Joined: Mon Jan 08, 2024 10:41 pm
Vehicle: Mondeo/duratec he/1999cc/2002

Re: TPMS locations gone after programming digital dash

Post by boosted_diesel »

Have you checked in the programming and configuration to see if it's an option to switch it on? It may have been switced off on the donor car or could come new with that setting off. Maybe just needs switched on.
Don Ridley
Posts: 1562
Joined: Sun Apr 01, 2018 2:31 am
Vehicle: 2016 Transit Connect

Re: TPMS locations gone after programming digital dash

Post by Don Ridley »

Try the as built from the digital IPC. Hopefully someone has already researched and determined the key as built data. Otherwise you have some work ahead of you.
miles5600
Posts: 11
Joined: Sun Feb 09, 2025 2:16 pm
Vehicle: fiesta MK8 2018

Re: TPMS locations gone after programming digital dash

Post by miles5600 »

problem is resolved, turns out I still had the TPMS by location option off in the IPC settings, I didn't see it.
my bad :)
boosted_diesel
Posts: 663
Joined: Mon Jan 08, 2024 10:41 pm
Vehicle: Mondeo/duratec he/1999cc/2002

Re: TPMS locations gone after programming digital dash

Post by boosted_diesel »

Aw well, there you go 👍
Post Reply