ADD CLIMATE

[curtis kelly]

JUST UPDATED FROM SYNC 2 TO SYNC 3 WANT TO ADD CLIMATE CONTROL TO RADIO ANYONE HAVE THE CODES THANKS

[brheberle]

I was trying to find this information as well. If anyone knows this and could share it would be very much appreciated!

[Livnitup]

Try this:
7D0-01-02 xxxx x2xx xxxx
and 1 of the following:
7D0-01-01 xxxx xxx3 xxxx - Dual Zone & HD radio avail
7D0-01-01 xxxx xxx2 xxxx - Dual Zone & HD radio not avail

[brheberle]

Thanks for the info!

Below is what worked for me. My value before the change was a 5.
7D0-01-02 xxxx x3xx xxxx


Thanks again.

[niborc43]

hi, when you carried this out were the temp zones in reverse?
Ive just done this same upgrade and the temp zones are the wrong way round.
Just wondering if yours was the same.

[Nitemare]

Any solution to the issue of driver/passenger controls reversed for UK cars??

Thanks

[12voltWILL]

I've done quite a few of these upgrades from Sync2/MFT to Sync3 and when the climate controls are backwards it's actualluy in the wiring.. There are 3 wires that need to be moved from one of the bezel harnesses to the other. I will try to post the solution tomorrow.

[Nitemare]

I've done quite a few of these upgrades from Sync2/MFT to Sync3 and when the climate controls are backwards it's actualluy in the wiring.. There are 3 wires that need to be moved from one of the bezel harnesses to the other. I will try to post the solution tomorrow.

Cool!!! Cheers.

[mmcmedia]

I've done quite a few of these upgrades from Sync2/MFT to Sync3 and when the climate controls are backwards it's actualluy in the wiring.. There are 3 wires that need to be moved from one of the bezel harnesses to the other. I will try to post the solution tomorrow.

Anything more on a solution to this please had the option on my sync 2 but chuck norris on sync 3 dissapointed

[FireBean]

Thanks for the info!

Below is what worked for me. My value before the change was a 5.
7D0-01-02 xxxx x3xx xxxx


Thanks again.

Just what I was looking for, thanks