2.4.1 - APIM Firmware update doesn't work

[kurek99]

[2B-4G10]

I have a saved APIM configuration before the upgrade. Saved configuration before programming.

Use Forscan v2.4.0 to update the APIM calibration. Select custom firmware and upload the original files of your APIM then click update.
Untitled.jpg

Failed to. Same error. Used Forscan 2.4.0 20200309

Use 2.4.2 Please, and make sure to toggle FORCE PROGRAM, after that tell us what happens

If it still didn't work try the following:
- Delete vehicle profile, and make new one
- Load ab files and reset module
- Clear DTC codes
- Re-try programming
- Make sure you have a decent adapter e,g, OBDLink with latest SCANTool firmware 5.5.3

If all failed contact support they're very helpful!!

[Halda]

Got sent a link today to 2.4.3 test so loaded on laptop and had a go on the car. Followed the procedure and it seemed to flash ok 5 different parts. Said procedure completed successfully. Did a reset then went into asbuild and changed 7DO-02-03 from 0000 to 0600 gave me a checksum error but wrote anyway. Went into radio settings and option to switch on radio logos had appeared. Switched it on and checked logos in Dab and they were there and working. But as soon as i went off DAB they disappeared and cant get them back. Has APIM got right files in it do I need to try and see if there are more updates available ?

[AHNA1711]

Got sent a link today to 2.4.3 test so loaded on laptop and had a go on the car. Followed the procedure and it seemed to flash ok 5 different parts. Said procedure completed successfully. Did a reset then went into asbuild and changed 7DO-02-03 from 0000 to 0600 gave me a checksum error but wrote anyway. Went into radio settings and option to switch on radio logos had appeared. Switched it on and checked logos in Dab and they were there and working. But as soon as i went off DAB they disappeared and cant get them back. Has APIM got right files in it do I need to try and see if there are more updates available ?

Hello , How to get the new test version 2.4.3 please?

[esqueue]

Got sent a link today to 2.4.3 test so loaded on laptop and had a go on the car. Followed the procedure and it seemed to flash ok 5 different parts. Said procedure completed successfully. Did a reset then went into asbuild and changed 7DO-02-03 from 0000 to 0600 gave me a checksum error but wrote anyway. Went into radio settings and option to switch on radio logos had appeared. Switched it on and checked logos in Dab and they were there and working. But as soon as i went off DAB they disappeared and cant get them back. Has APIM got right files in it do I need to try and see if there are more updates available ?

Wow, just figured out how to get 2.4.3. I'll see if it works tomorrow after eye surgery. Don't know when I'll be back on.

[Halda]

WhatsApp Image 2020-09-20 at 23.59.24.jpeg (164.44 KiB) Viewed 5602 times

The attachment WhatsApp Image 2020-09-20 at 23.59.24.jpeg is no longer available

Success finally ! Had to update 3.4 ver 20021 to 3.4 ver 20196

[esqueue]

finally updated my AIPM software. Used 2.4.3 but still no calm screen options. Oh well, not worth bricking.

Screenshot 2020-09-21 174239.png (305.88 KiB) Viewed 5582 times

[AHNA1711]

finally updated my AIPM software. Used 2.4.3 but still no calm screen options. Oh well, not worth bricking.
Screenshot 2020-09-21 174239.png

You can activate Calm Screen from APIM Module Configuration search for Calm Screen and select Enable then Write.

[esqueue]

finally updated my AIPM software. Used 2.4.3 but still no calm screen options. Oh well, not worth bricking.
Screenshot 2020-09-21 174239.png

You can activate Calm Screen from APIM Module Configuration search for Calm Screen and select Enable then Write.

I activated via the asbuilt codes. When I checked this method, it already is set to enabled.

[ttlandcmos]

finally updated my AIPM software. Used 2.4.3 but still no calm screen options. Oh well, not worth bricking.
Screenshot 2020-09-21 174239.png

How can i get url for forscan v2.4.3?