Forscan injector values

[GiuSIM]

How can i fin PID for injector balance focus 2 1.6tdci?

[GiuSIM]

Can sombody help me please?

[GiuSIM]

I have this adapter.It is good for Ford Focus mk 2 ?
Itry to connect the car and it says Adaptar not commpatible with your car.

What are possible problems if I use "regular" ELM327 instead of "recommended" adapter?
https://forscan.org/support/show_conten ... ecommended

Can you help me please.I bought 4 new injectors and 1 or 2 are not good and i dont know were can i find injectors in PID.

[FORScan]

Sorry, some PCMs have no injector balance PIDs available for diagnostic.

[GiuSIM]

Thank you.

[lohberg57]

I found old Snapshot from my car. I changed with helping Forscan - one Injector.
And it works, but really careful.
Maybe Photo helps showing

14 Injektor Einlesen HowTo.PNG (190.9 KiB) Viewed 1619 times

[GiuSIM]

Thank you.

[GiuSIM]

Good morning
How can I calibrate or test the throttle body on my ford focus mk2 1.6tdci with forscan. When I cleaned the throttle body and started the engine I heard strange noises and I want to check if the throttle body is ok because I have fluctuations in idle when the engine is warm is.Thank you very much and sorry for my english.

[Ecmbuster]

Diesel engines do not have a throttle body.
Diesel engines of that vintage require the CORRECT injector to "programmed into the CORRECT cylinder".
Diesel engines of that vintage may also require an "injector pilot relearn".
Nothing will work "if faults are still recorded".
Nothing will work if "one or more injectors are leaking" or the sealing washers are damaged or missing.

[GiuSIM]

Good morning
I don't have any errors in the system. Since I changed the injectors in my car, when it's warm, there are fluctuations in the rpm for about 15 seconds.
"injector pilot relearn" how can i do that?Thank you.