Page 2 of 2
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:36 pm
by fbstn
you mean's flash don't use stop buses all ?
the key on stage2 alltime ?
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:44 pm
by fordsmax471
fbstn wrote: Mon Oct 19, 2020 5:36 pm
you mean's flash don't use stop buses all ?
the key on stage2 alltime ?
first test
do not change forscan settings
and do two separate programming
first programming---> SBL: bootloader and Strat: ET4T-14C026-BL
and
second reprogramming---> SBL: bootloader and Calib: ET4T-14C088-BL
if it fails
second test
then make a change to the forscan settings and try again two separate programming
first programming---> SBL: bootloader and Strat: ET4T-14C026-BL
and
second reprogramming---> SBL: bootloader and Calib: ET4T-14C088-BL
Re: 2014 explorer ipc flash faild
Posted: Mon Oct 19, 2020 5:47 pm
by fordsmax471
Re: 2014 explorer ipc flash faild
Posted: Tue Oct 20, 2020 3:59 am
by fbstn
failed on load block13/26
Re: 2014 explorer ipc flash faild
Posted: Tue Oct 20, 2020 4:39 am
by fbstn
is it problem ons use 2.4.3test20200920 ,who can give other versions ?
Re: 2014 explorer ipc flash faild
Posted: Tue Oct 20, 2020 5:43 am
by fordsmax471
fbstn wrote: Tue Oct 20, 2020 3:59 am
failed on load block13/26
Re: 2014 explorer ipc flash faild
Posted: Tue Oct 20, 2020 5:49 am
by fordsmax471
fbstn wrote: Tue Oct 20, 2020 4:39 am
is it problem ons use 2.4.3test20200920 ,who can give other versions ?
PM
Re: 2014 explorer ipc flash fail
Posted: Thu Oct 22, 2020 12:44 pm
by fbstn
go to 4S store use IDS fail !
reflash with UCDS force flash dead module be OK !!
THANK YOU ! fordsmax471 !
everybody Be careful when flash IPC !