Help! !! !! v2.4.0.test202000121 refreshes BCM crashes

[lxlxj]

Help! !! !! v2.4.0.test202000121 refreshes BCM crashes
ESL27, the firmware update is automatic, everything is normal during the update, after the update, the car does not respond after opening the key, just like the power failure, now the OBD is no longer connected

微信图片_20200313170751.png (37.37 KiB) Viewed 4028 times

Current status video
https://drive.google.com/file/d/1OH1Vu9 ... sp=sharing

https://youtu.be/H6-Yfd6xD-o

[lxlxj]

Using ELS27 to update the firmware, now the car is like a power outage

[fordsmax471]

if you used the original OBD adapter, this is not the cause of the malfunction

please describe the software update in more detail

could be a video of the current situation

[lxlxj]

Current status video

https://youtu.be/H6-Yfd6xD-o

[fordsmax471]

switch ignition on and connect the OBD adapter
can you get the connection and what the error codes are and so on.

[lxlxj]

switch ignition on and connect the OBD adapter

微信图片_20200314163438.png (52.99 KiB) Viewed 3933 times

[fordsmax471]

ok
we check if the adapter and software are okay

connect the adapter to the computer and run FORScan without the car

if you still have an old profile then press "YES"

123.GIF (111.94 KiB) Viewed 3924 times

[fordsmax471]

if the adapter and software are in ok you should get such a picture

321.GIF (127.64 KiB) Viewed 3923 times

[fordsmax471]

then check all fuses

https://www.autogenius.info/ford-f-150- ... x-diagram/

and also measure the OBD connector on the multimeter

567.GIF (67.28 KiB) Viewed 3909 times

[lxlxj]

Thank you very much, try it tomorrow, but the configuration file has been deleted. I still have a 2019 F150 that can read the configuration file. Can it be used?