ipc module update error

[albix76]

good morning everyone, I tried to update my ipc module, only that during the procedure it got stuck, now I find myself with the instrument panel completely off, I tried to redo the operation, but I can no longer proceed, the last attempt stopped me at 85%. can you help me why I can't finish the operation? thank you sorry I have a Ford cmax 2016

[fordsmax471]

which adapter you are using
whether you are using a battery charger
whether you can connect to the IPC
vehicle previous backup profile
which date FORScan 2.4.0 version you are using

[rbkteam]

Hi,
we're a lot of people with the same isue in my19 and my20... IPC module is "untouchable" for now.
Waiting a Forscan update or some other solution for this.

[albix76]

i have an els27 cable, the machine is connected to a charger, the ipc module i see it, but when i try to write the firmware it freezes, the last time at 83%, i am using forscan 2.4 20200120 now, I find myself with the instrument panel completely off

[gianni_66]

I have updated ipc with forscan 20200121 and obdlink ex

[fordsmax471]

I have updated ipc with forscan 20200121 and obdlink ex

[albix76]

I wanted to thank fordsmax471 for the assistance, thanks to him and his experience I was able to restore my IPC module which during the update had crashed. thanks for everything

[gianni_66]

I wanted to thank fordsmax471 for the assistance, thanks to him and his experience I was able to restore my IPC module which during the update had crashed. thanks for everything

explain how you solved it, it can be useful to others

[fordsmax471]

I wanted to thank fordsmax471 for the assistance, thanks to him and his experience I was able to restore my IPC module which during the update had crashed. thanks for everything

explain how you solved it, it can be useful to others

Yes, sure

written by google translation
.
IF THE MODULE UPDATE FAILED
.
note who does not use the battery charger and does not make a backup cannot help

but here he is:
the adapter was els27v3 STN1170 Ver3.3.1, we wanted to update it latest Version 5.0.0 release date: January 8, 2020 but it failed (don't know why yet) but this is a separate issue.
we used FORScan software 2.4.0 date 20200114
older car profile which showed a dead IPC module ( so we always make backups )
car profile file location C:\Users\AppData\Roaming\FORScan\vehicles
the same module software that was originally in the figure no.3
and settings FORCE PROGRAM in the figure no.4
we adjusted the forscan connection settings all auto and auto-increase
we setup the OBD adapter baud rate 38400bps and FDTi dariver settings latency timer =1
battery charger 6amps ( good is 8-12amps )
after a successful upgrade load As Built original *AB factory configuration (download for Motorcraft site by VIN) write All (all blocks!) to the module. (optional-because the latest version does it automatically)

START .png (236.32 KiB) Viewed 7777 times

[gianni_66]

I wanted to thank fordsmax471 for the assistance, thanks to him and his experience I was able to restore my IPC module which during the update had crashed. thanks for everything

explain how you solved it, it can be useful to others

Yes, sure
.
if the module update failed
.
note who does not use the battery charger and does not make a backup cannot help

but here he is:
we used FORScan software 2.4.0 date 20200114
older car profile ( so we always make backups )
the same module software that was originally in the figure no.3
and settings FORCE PROGRAM in the figure no.4
we adjusted the forscan connection settings all auto and automatic baud rate speed
we setup the OBD adapter baud rate 38400bps and FDTi dariver settings latency timer =1
battery charger 6amps
it was 2 days all does not immediately remember
START .png

very good