2014 explorer ipc flash faild

[fbstn]

you mean's flash don't use stop buses all ?

the key on stage2 alltime ?

[fordsmax471]

you mean's flash don't use stop buses all ?

the key on stage2 alltime ?

first test do not change forscan settings and do two separate programming
first programming---> SBL: bootloader and Strat: ET4T-14C026-BL
and
second reprogramming---> SBL: bootloader and Calib: ET4T-14C088-BL
if it fails
second test then make a change to the forscan settings and try again two separate programming
first programming---> SBL: bootloader and Strat: ET4T-14C026-BL
and
second reprogramming---> SBL: bootloader and Calib: ET4T-14C088-BL

[fordsmax471]

the key on stage2 alltime ? yes

we are waiting for the results

[fbstn]

failed on load block13/26

[fbstn]

is it problem ons use 2.4.3test20200920 ,who can give other versions ?

[fordsmax471]

failed on load block13/26

[fordsmax471]

is it problem ons use 2.4.3test20200920 ,who can give other versions ?

PM

[fbstn]

go to 4S store use IDS fail !

reflash with UCDS force flash dead module be OK !!

THANK YOU ! fordsmax471 !

everybody Be careful when flash IPC !