P0A7C criteria PCM parameter / wrench light?

Share your FORScan experience with other users
Jasonisawesome
Posts: 5
Joined: Sun Dec 27, 2020 6:49 pm
Vehicle: 2009 ford escape hybrid

Re: P0A7C criteria PCM parameter / wrench light?

Post by Jasonisawesome »

My live readings are all within it the ranges.

The wrench light will come on and trigger within driving 3 miles at 70 mph at 45°F
Attachments
Screenshot_20210113-210315.png
Screenshot_20210113-210315.png (414.76 KiB) Viewed 3164 times
tim0574
Posts: 8
Joined: Wed Nov 18, 2020 9:38 pm
Vehicle: 2011 Ford Escape Hybrid

Re: P0A7C criteria PCM parameter / wrench light?

Post by tim0574 »

How about a sweet hood scoop mod to channel some air strategically? :D

Any chance the trans cooler lines in the radiator are picking up the engine coolant heat since that's running in the 180s on highway drives?

Edit: I looked at the radiator parts breakdown & previous messages to realize the radiator runs the 2 coolant systems. Nothing for the trans fluid like a typical vehicle.
tim0574
Posts: 8
Joined: Wed Nov 18, 2020 9:38 pm
Vehicle: 2011 Ford Escape Hybrid

Re: P0A7C criteria PCM parameter / wrench light?

Post by tim0574 »

Outside temp didn't dissuade the wrench light today. Outside temp near zero today & light popped within 5 minutes of highway driving.
Jasonisawesome
Posts: 5
Joined: Sun Dec 27, 2020 6:49 pm
Vehicle: 2009 ford escape hybrid

Re: P0A7C criteria PCM parameter / wrench light?

Post by Jasonisawesome »

tim0574 wrote: Sat Feb 06, 2021 9:45 pm Outside temp didn't dissuade the wrench light today. Outside temp near zero today & light popped within 5 minutes of highway driving.


Mine as well. I took mine in to tHe dealership and had them update the PCM. didn't help
Jrpavv
Posts: 13
Joined: Sat Aug 31, 2019 1:13 pm
Vehicle: Fusion Hybrid 2011

Re: P0A7C criteria PCM parameter / wrench light?

Post by Jrpavv »

How much did your dealer charge for the tab?
Jrpavv
Posts: 13
Joined: Sat Aug 31, 2019 1:13 pm
Vehicle: Fusion Hybrid 2011

Re: P0A7C criteria PCM parameter / wrench light?

Post by Jrpavv »

Does anyone have the procedure for bleeding the secondary coolant system? I used to have it, but can't find it. I know you have to loosen the 12 mm bolt on the inverter, but don't remember if you have to have the engine running or not.
Jasonisawesome
Posts: 5
Joined: Sun Dec 27, 2020 6:49 pm
Vehicle: 2009 ford escape hybrid

Re: P0A7C criteria PCM parameter / wrench light?

Post by Jasonisawesome »

Jrpavv wrote: Fri May 21, 2021 5:31 pm How much did your dealer charge for the tab?
They charged me $100 out the door.
Jrpavv wrote: Fri May 21, 2021 5:34 pm Does anyone have the procedure for bleeding the secondary coolant system? I used to have it, but can't find it. I know you have to loosen the 12 mm bolt on the inverter, but don't remember if you have to have the engine running or not.
You'll need the motor running to get the coolant to push the air pockets out
ahernandez15
Posts: 4
Joined: Tue Jan 05, 2021 1:46 am
Vehicle: ford fusion hybrid 2010

Re: P0A7C criteria PCM parameter / wrench light?

Post by ahernandez15 »

So 2021 any solutions to this lol??
wr400f250
Posts: 24
Joined: Sat Oct 05, 2019 1:01 am
Vehicle: 2010 Fusion Hybrid, 2009 Escape Hybrid, 2003 Explorer 4.6

Re: P0A7C criteria PCM parameter / wrench light?

Post by wr400f250 »

It's one of 3 things for sure. Probably a combination of 1 and 2.

1. Air in coolant. Only thing I haven't tried is a vacuum fill.
2. Transmission fluid getting too hot. 2013+ Fusion hybrids added a small transmission cooler.... suspicious...
3. Faulty inverters (unlikely, and let's hope not)

Even though I don't own the car anymore, I still have access to it. I've been brainstorming a transmission cooler idea that I'll give a shot as soon as I get some time to do it. Money's been tight so it's been pretty low on my priorities list.
ahernandez15
Posts: 4
Joined: Tue Jan 05, 2021 1:46 am
Vehicle: ford fusion hybrid 2010

Re: P0A7C criteria PCM parameter / wrench light?

Post by ahernandez15 »

It's just crazy how city driving. At much higher temps it doesn't trigger that light. Highway driving at 90 plus weather will trigger in 10 mins.


At this point from what I see I doubt even dealer can fix issue
Post Reply