FORScan forum

kekela777 wrote: Tue Jul 16, 2024 9:07 am

colin39 wrote: Tue Jun 25, 2024 6:32 pm

kekela777 wrote: Tue May 14, 2024 1:22 pm

Ok lets start from scratch, what's the part number on your original key? Remove the key blank and the part number is on the end

that was point i didn't knew part number :/ because car came with aftermarket key it didn't had any part number written on it.
thanks for responce

Can you post a picture of your key please

andyh1108 wrote: Wed May 06, 2020 3:26 pm
Thanks for the information, I assume this is a UK vehicle as I want to add this to my Edge. Can you tell me where you got the key from?

Andy

I have a 2021 Ford Edge and I have successfully added OEM remote start.

Raiko4 wrote: Fri Sep 02, 2022 6:13 am Remote start:
BCMii As-built
726-22-02 (2014+ MY) xxxX xxxx xxxx
0 (Disabled)
1 (Enabled)

Is changing this the same as enabling "remote start" from BCMii module?

After doing this and the other steps as described the whole thing worked for me great.
I have ordered a key from https://www.aliexpress.com/item/1005006 ... 1802EzC1aN
#7 - 434.26MHz and it worked like a charm together with the old key. The car is a Mondeo mk5 from Denmark.
Thank you guys. What a great forum ...

Hi, I own a S-Max2 2019, I have had a working remote start since summer. Everything was fine until now in the cold there was a problem. At temperatures below zero, the car will not start using the remote start. Starting from the cabin is no problem. I found that when starting from the cabin, the glow starts first and after a few seconds the car starts. With remote start, the car does not start the glow and starts right away. Any idea how to program the remote start glow to turn on for a few seconds before starting?

Hi,
What is the maximum distance from which the car can be started?

Huginekk wrote: Fri Nov 29, 2024 6:19 pm Hi,
What is the maximum distance from which the car can be started?

Hi, I've tested that the S-Max can handle 100m without any problems. I haven't needed more so I don't know.

A which key does work for my mondeo mk5 2018? Can you send me link to Aliexpress please?

Hello! I am trying to enable Remote Start on my 2017 Kuga 2.0 Diesel Powershift. I have enabled it in BCM, IPC, and RFA. When trying to remote start, it tries to start but fails, logging DTC P027C in PCM. I have spoken to someone in Russia, and apparently, I need to edit the Fuel pump type. He said it could be done with UCDS. Can it also be done with Forscan? Could someone help me?

Здравствуйте, подскажите решение, что сделали? У меня тоже самое. Поменял в форскане тип топливного насоса но ничего не изменилось. Или может кто чего подскажет по дистанционному запуску на дизельной Куге

Right, i bought a new key (aftermarket) for my Mondeo 2019 Hybrid. 433Mhz. Programmed it via the PATS module, add ignition key.
After programming the new key it said completed and showing 3 admin keys.

But as many others encounter the key only worked in the backup slot. Only when changing the RTM module from 1 to 2 (UCDS listed as region) the key started to work but the original key did not work any more.

Then i sumbled accross a video where that guy explains that behavoir has to do with the original programming of the keys. 3-4 fob buttons differents and bassicaly say's all keys have to be removed and then programmed again to get it working.

Did anyone tried this and does anyone actualy knows what realy changes when change the RTM module as-built?

https://www.youtube.com/watch?v=gHlEGLt1NeI